View Single Post
  #3 (permalink)  
Old 06 Jan 2007, 06:31 pm
wait4me6920 wait4me6920 is offline
Young Cruiser
 
Join Date: Jan 2005
Location: Prattville, Alabama, USA.
Posts: 80
Default

Quote:
quote:Originally posted by SteelBlueGT

Minimum plug wires from MOPAR high performance and new copper champions. I loved my NGK Iridiums with stock gap. Ran 35,000 with no maintenance and then I sold my 03GT. I found NGK and MOPAR wires gave me very smooth performance and a little quicker acceleration but no better gas mileage.
I also went with NKG iridium plugs, gapped at about .030 - most recommendations I've run across recommend .028 - .032, so I split the difference...

Amen on better wires! I'm sure the MOPAR high performance wires are vastly superior to original equipment & should do the trick. I opted for Magnecore when I installed my iridium plugs & have been well satisfied over the 10k or so since installation...

Not a performance move, but should help keep the old scoot running its best ...
__________________
2005 Turbo Lite, Stage 1, Mopar/Borla cat-back exhaust, Eibach swaybars, Bilstein coilovers, 18/8 TSW Montage wheels with 225/40/18 Exclaim UHPs, LED taillights, K & N drop-in & a few other goodies...
Reply With Quote