Quote:
quote:Originally posted by gonzomania
I've looked at the d/y/i page and the chiltons manual and Pt service Cd to get to the three screws behind the weatherstriping to remove the door pillar applique. You must move the weatherstriping out of the way. Has any one done this, do you just pull the weatherstriping out, roll it away from the exterior. Afraid of loosening the striping an not be able to reattach it. Any help would be appreciated.
Gonz
|
I've done it. Just pull the weather stripping out of the way. It goes back on easily, I used a rubber mallet to ensure it was firmly back in place. Don't know if this will help any, check out this link, I took some photos while I did mine.
http://www.randgraphics.org/PT_Cruis...r_applique.htm