View Single Post
  #3 (permalink)  
Old 10 May 2008, 06:11 pm
ucantcme's Avatar
ucantcme ucantcme is offline
Fanatic Cruiser
 
Join Date: Aug 2007
Location: Wixom, Michigan
Posts: 808
Send a message via AIM to ucantcme
Default Re: cost for replacing lower control arm bushings

Quote:
Originally Posted by tm05cruiser View Post
Just got my wifes 05 cruiser back from the dealer , they replaced the rack and pinion ,under warranty ,after i made a call to Chrysler. Anyhow, she came home from work the other day, and said when she takes off from a stop , she was sometimes hearing a clunk. So i took it for a ride , not all the time , but sometimes on a fast start i would hear it. So i took it home pulled the wheel, and sure enough the lower control arm bushings are junk. It goes in for Pa inspection on tuesday , so i was wondering what i can expect to pay to have these replaced. And also , its the drivers side , the passenger side look ok. But should i have both sides done. Thanks
I had the same EXACT problem. I took it to the repair shop I last had it worked on - The mechanic said he tighten a few loose bolts, and that did it. This was not 2wks after my lower control arms were replaced, and my wheel bearings were done.
__________________
Your one stop Gaming Forum!

My Baby:
01' Taupe Limited PT Cruiser w/ rear spoiler, Drop in K&N Air Filter, Altezza Tail lights, Limo tint all around,
In-dash CD/DVD/Radio made by Jensen, Vent Visors, Chrome Shift Plate, Chrome Antenna Bezel, Chrome Grille inserts,
back-up camera, and a system containing 3 MTX 10" subwoofers and an eclipse 1000watt amplifier.

Wish List: Aftermarket tires/wheels, turbo!

CUSTOM DECALS FOR YOUR CRUISER!
Reply With Quote