[2002Gold]

I'm working on installing the Carbureted Buick V-6 engine shown below into my 2002 PT Cruiser. It will be an automatic RWD application. Here are 3 pictures of my progress. The engine is being supported by chains on the forward side, which are attached to a wooden support frame shown in the 3rd picture below. The trans is resting on the cross member that I fabricated. The car is sitting on jack stands. This allowed me lots of working room under the car while fabricating the engine mount cross member bracket. Note the modified 6" brake booster and Corvette brake master cylinder I'm using. This brake assembly mod gave me the clearance I needed between the engine and the brake assembly. Thanks for looking.