View Single Post
  #2 (permalink)  
Old 04 Sep 2003, 02:24 am
macster macster is offline
Fanatic Cruiser
 
Join Date: Apr 2003
Location: San Diego, Ca, USA.
Posts: 630
Send a message via AIM to macster
Default

The dealer is unable to "fix" this problem. A call has been placed to Chrysler Engineering for a fix and my belt was sent to them. I received a new belt (installed) which gets rid of the noise for a while. But it will come back. There are three other PT's with this problem. My hat is off to the service manager and staff at McCune Chrysler in National City Ca. They were extremely courteous and appreciated me working with them to get a fix. He the Service Manager noticed that I had the Stage 1 and the BOV in and said it didn't bother him, he also noticed that I had "DONOT FLASH" on my PCM, and he mentioned that sometimes they get updates etc to the units, and that not being able to flash the unit would hinder me from getting them. I told him that I had the old unit and he could flash that if and when the updates came out.

macster
__________________
Don\'t help me
Help the bear

Patriot Blue PTGT, Stage1, K&N Typhoon, 2.5\" Cat back exhaust, Sun Hyperground, Sun HOT INZAMA Hyper Voltage system, Adams Uppipe
Reply With Quote