GT Stuff for Sale!

[Chipmunk]

quote:Originally posted by Punch

got the pod today thanks.

now how do i install these things?

got any webpages, links, urls, manuals etc......

will pay for shipping if you have any of the books for the guages, pods.

thanks steve

Steve,

Instant Message me on AOL and I can help you out. My screen Name is Chpmnk1200

You use the fitting I gave you to tap the Vac line for the Boost Gauge as shown in the pic below...


You will need a Secondary 02 Sensor for the Air/Fuel Gauge because the computer offset's the voltage on the stock one.

The voltage meter is pretty basic. Need a Positive and a Ground.



Matt

[Punch]

1 more question, the pod goes over the stock one or replaces it?
also did you wire the lights for the guages to a wire behind the pod?

sorry for buggin ya so much!

[Chipmunk]

quote:Originally posted by Punch

1 more question, the pod goes over the stock one or replaces it?
also did you wire the lights for the guages to a wire behind the pod?

sorry for buggin ya so much!

The pod replaces the stock one. I put a small piece of plywood behind the headliner fabric so that i could put a screw through to secure it. I used the illumination wire that came from my radio harness, but I think there is one that you can use behind the pillar as well. Do a search on these forums and you should be able to find it. If you have anymore questions dont hesitate to ask...

I also have 2003 Service Manual for $60 if your interested. It really helps for finding the right wires and connectors.

Matt

[Punch]

thanks again, also i have just got the cd version of the manual.

punch

[Punch]

hey are the numbers on these guages supposed to light up or just around the outside of the guage?

also where did you scavenge the 2" peice of hose with the 2 red clamps, I had to temporarly build this peice.