PT Cruiser Forum  
Advertisements
       

Go Back   PT Cruiser Forum > Marketplace > Classifieds: Want To Buy

PT Cruiser Forum

Advertisements
PCM for a 2003 GT turbo

 
Like Tree7Likes

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 21 Jul 2016, 02:52 pm
Young Cruiser
 
Join Date: Aug 2014
Location: Wisconsin
Posts: 60
Default PCM for a 2003 GT turbo

Anyone have one in good working order and how much? Thanks
Handy_Cruiser likes this.
Reply With Quote
  #2 (permalink)  
Old 21 Jul 2016, 02:57 pm
Handy_Cruiser's Avatar
Obsessed Cruiser
 
Join Date: Oct 2013
Location: Arkansas
Posts: 10,264
Default Re: PCM for a 2003 GT turbo

Check out this ad. It's a good price. And yes, your 2003 GT will need the included injectors since it's a Stage 1 PCM.

03 GT Stage 1 PCM & Injectors for sale
__________________
Reply With Quote
  #3 (permalink)  
Old 21 Jul 2016, 04:46 pm
NitroPT's Avatar
Obsessed Cruiser
 
Join Date: Jun 2012
Location: USA kalyfornia
Posts: 15,637
Default Re: PCM for a 2003 GT turbo

^^^ 1/2 LIKE ^^^^^


Once again I would like to give a "Like" to the previous response except for the wording "needing" the S1 larger injectors unless the intended use is to Road Track a Pt Cruiser with extended periods of WOT operation. I do want to say I often notice that the wording, need, needing and required tend to fall into the same descriptive definitions at times on forums but seldom to do we read actual empirical information sourced from manufactures using the word required.

The rare and very little known PT Cruiser STAGE II PCM would actually "require" the larger injectors because of one of the many calibration including and not limited is to increase the injector duty cycle mapping.
__________________
To view larger pictures simply "click " on the picture!

Dalai Lama
"Share you knowledge. It's the best way to achieve immortality."
ASE MASTER TECHNICIAN

Last edited by NitroPT; 21 Jul 2016 at 04:49 pm.
Reply With Quote
  #4 (permalink)  
Old 21 Jul 2016, 06:13 pm
Cool Cruiser
 
Join Date: Dec 2005
Location: stockton, ca., USA.
Posts: 242
Default Re: PCM for a 2003 GT turbo

I have a 03 GT running a Stage 1 PCM with Stock Injectors. I have had no problem running it that way, but I don't do extended WOT runs with it. My Gt has over 213,780 miles on it. When I bought the car new it has always run a little rich.
Reply With Quote
  #5 (permalink)  
Old 22 Jul 2016, 07:12 am
Veteran Cruiser
 
Join Date: Aug 2015
Location: Lake Wales, FL
Posts: 4,690
Default Re: PCM for a 2003 GT turbo

I have one I'd let go for about $1,700. It comes with an entire 03 GT wrapped around it.
Handy_Cruiser likes this.
__________________


Aspire to inspire before you expire.

Last edited by chuzz; 22 Jul 2016 at 09:20 am.
Reply With Quote
  #6 (permalink)  
Old 22 Jul 2016, 08:08 am
Handy_Cruiser's Avatar
Obsessed Cruiser
 
Join Date: Oct 2013
Location: Arkansas
Posts: 10,264
Default Re: PCM for a 2003 GT turbo

Quote:
Originally Posted by chuzz View Post
I have one I'd let go for about $1,700. It come with an entire 03 GT wrapped around it.
Now if it came in a 2003 Dream Cruiser wrapper, I might be interested.

On the matter of injectors, the 2003 PT GT had the 527cc injectors (usually pink) and 2004 and up GT (and turbo lite) and the 2003 Stage 1 kit have 577cc injectors that are black with blue o-rings. As long as you have the 577 cc injectors, you can run the 2003 Stage 1 PCM. That is what the 2003 Stage 1 PCM and the OEM 2004 and up GT and turbo lite PCM's are scaled for. Of course, if you are into racing and/or want to do a lot of monitoring, data logging, re-scaling and the rest, you likely shouldn't be using an off-the-shelf Stage 1 anyway. Or if you have a way to monitor the air/fuel ratio and want to try it with the pink injectors, that's cool too. But if you are just looking for a plug and play upgrade, use the right injectors on your 2003 GT Stage 1 like Mr. Chrysler intended and like came in the 2003 Stage 1 kit from Mopar. The 577cc injectors are very common and one of the prominent part numbers for these is 04891574AB.
__________________

Last edited by Handy_Cruiser; 22 Jul 2016 at 08:41 am.
Reply With Quote
  #7 (permalink)  
Old 23 Jul 2016, 11:49 am
NitroPT's Avatar
Obsessed Cruiser
 
Join Date: Jun 2012
Location: USA kalyfornia
Posts: 15,637
Default Re: PCM for a 2003 GT turbo


Last edited by NitroPT; 23 Jul 2016 at 12:24 pm.
Reply With Quote
  #8 (permalink)  
Old 23 Jul 2016, 11:50 am
NitroPT's Avatar
Obsessed Cruiser
 
Join Date: Jun 2012
Location: USA kalyfornia
Posts: 15,637
Default Re: PCM for a 2003 GT turbo

You do not require the 577 injectors to use a STAGE 1 PCM but if you intend on performance driving frequently then only prudence suggest to get them.


We (keven @ SkyedTuning) and myself have looked at the calibration differences between a stock PCM and a PT Cruiser STAGE 1 last updated version and for normal street use you can safely use smaller stock fuel injectors even in limited boosted events like passing on the freeway without harm to the engine.


an example and there are many:
Quote:
Originally Posted by chromer don View Post
I have a 03 GT running a Stage 1 PCM with Stock Injectors. I have had no problem running it that way, but I don't do extended WOT runs with it. My Gt has over 213,780 miles on it. When I bought the car new it has always run a little rich.
__________________
To view larger pictures simply "click " on the picture!

Dalai Lama
"Share you knowledge. It's the best way to achieve immortality."
ASE MASTER TECHNICIAN
Reply With Quote
  #9 (permalink)  
Old 05 Aug 2016, 04:58 pm
Young Cruiser
 
Join Date: Aug 2014
Location: Wisconsin
Posts: 60
Default Re: PCM for a 2003 GT turbo

I just need the pcm. I'm not looking to upgrade. I was hoping someone had one. The numbers on my PCM are P05033065AG. I don't know if the AG at the end needs to match or not? Anybody know?
Handy_Cruiser likes this.

Last edited by KandyKid; 05 Aug 2016 at 05:01 pm.
Reply With Quote
  #10 (permalink)  
Old 05 Aug 2016, 05:25 pm
Senior Cruiser
 
Join Date: Jun 2014
Posts: 1,611
Default Re: PCM for a 2003 GT turbo

The letters at the end don't matter. After they update the software they change the letter at the end. But they are all backwards and forwards compatible.
Handy_Cruiser likes this.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
2003 pt cruiser 2.4l Turbo came without turbo subclassic General Turbo Discussions 26 14 Jun 2016 12:57 pm
2003 GT Turbo mictat2214 General PT Cruiser Discussions 5 03 Oct 2014 10:14 am
2003 GT TURBO DODGETHIS Classifieds: Want To Buy 1 07 Nov 2011 05:19 pm
Need for 2003 PT Non turbo VOETOM Classifieds: Want To Buy 3 04 May 2009 04:39 am
New 2003 Turbo BLH1 General Turbo Discussions 6 31 Mar 2004 08:53 pm


All times are GMT -5. The time now is 10:29 am.




Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
LinkBacks Enabled by vBSEO 3.6.0 PL2 © 2011, Crawlability, Inc.
vB.Sponsors