Antenna Bezel Replacement

[Chip]

This is most likely a silly question, but I need to ask.

For Christmas I was given a chroma bezel for the antenna. It looks like all I need to do is just loosen the antenna with a wrench and then lift up the old bezel and replace it with the new one. My question is this.

The antenna looks like it has indents for a special wrench to loosen the antenna base in order to lift off the old bezel. Are those indents just for show, do I need to use a screwdriver to loosen a nut that holds the old bezel in place, or does it just lift off once the antenna is removed?

This should be easy, but I do not want to start banging on the PT if I do not have to.

[bigdogdad]

Here'a a link that will hopefully help you out:

http://www.ptcruiserlinks.com/forum/...=antenna,bezel,

[Franksredpt]

Yep, just follow the instructions provided in the link. Its really easy. Should not take more than 5 minutes.

[Chip]

Thanks everyone, it finally stopped raining here in Western Washington and I just popped it on. It was as simple as described and without your help I would have unnecessarily removed the antenna. It looks great and just a bit different than those coming off the show room floor.