Vinyl Flame kits

[johng]

Does anybody know of a good vinyl flame kit company that sells kits at REASONABLE prices.
I know you get what you pay for but geeezzz!!!
A half way decent looking flame kit that you have to apply yourself for 300.00-400.00 and up.
I have done the magnetic flame kits which blew off at 75 MPH 50.00 down the drain.
So, if anybody knows please let me know..e-mail or other wise
Thanks group

[CREWZIN]

Try here: http://www.streamlinedesign.com/ptflames/

Go to the top of the page and start clicking away at different colors and different designs. Pick the color of your PT from the top lines of colors and then go thru the different flame/stripe designs from the next row. If you see one you like, click and drag the flames/stripes from the display to the PT above it. Have fun.

[Gary04GT]

Here is another company that you might want to consider:

EDECALS.COM: http://www.edecals.com

[Kammler68]

PT Graphics has some reasonably priced stick-ums for ya. Dig the tribal flames myself. Lots of colors and they'll send ya a sample card before you buy so you can be sure you get what you want. Before you get carried away with vinyls, get yourself some Rapidtac.

http://ptcafe.homestead.com/index.html

http://www.rapidtac.com/

[santacruzer]

Try Val's flame kits, her link is on this forum under the graphics section. The kits are really nice, looks like paint.

[Gazoo]

Sorry for the large file, but here are the new vinyl flames added today. Ordered at Streamline Design.



The theme if you haven't guessed is purple. These almost look fake in the picture. If I had to do it over again I would have ordered the black outline. (course if money is no object, paint is always best)


Notes for the timid: These are a bitch to put on but if you take your time you'll be okay. 1st one=1 hour 2nd one=20 minutes. Hardest part is the curved fender. 2nd one went on easier when I decided not to do it like the instructions said. Feel free to e-mail me if you want a few pointers.

[gonzomania]

Crewzin , really cool site thanks for the info. Now I know what the car would look like. Thanks

[IRPT]

Gazoo, those look good, I like the color of the flames with the color of your Cruiser.

[Mike-in-Orange]

Hey Gazoo, were'd you get the "Turbocharged" emblem on your rear hatch? I take it you ordered new PT Cruiser emblems after stripping everything off, but I'm curious about the "Turbocharged". By the way, nice choice in color/model!

[AndyKay]

Rich at Streamline Design has my highest recommendations(http://www.streamlinedesign.com/ptcr...ptcruiser.html). His products are of the highest quality and his prices are the best.
Put that with unbelievable customer service and a dedication to the PT Cruiser community, and I wouldn't go anywhere else.

Here's a pic of the GOld to Silver shade shift flames from Streamline that I had put on last week.