PT Cruiser Forum  
Advertisements
       

Go Back   PT Cruiser Forum > General Forums > Exterior Accessories Forum

PT Cruiser Forum

Advertisements
engine chrome

 
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 01 Dec 2003, 01:40 am
Fresh Cruiser
 
Join Date: Nov 2003
Location: .
Posts: 6
Default engine chrome

I HAVE A K&N INTAKE AND I AM LOOKING FOR SOME TYPE OF COVER OR SHIELD IN CHROME. DOES ANYBODY MAKE CUSTOM CHROME ENGINE PIECES OR ARE THERE ANY MADE ALREADY?
Reply With Quote
  #2 (permalink)  
Old 01 Dec 2003, 06:55 pm
Obsessed Cruiser
 
Join Date: Sep 2001
Posts: 27,744
Default

Median,

There are a dozen or more places that make/sell chrome engine pieces....in fact, you can chrome EVERY bit of the engine if you desire..even under the hood....all it takes is cash. Here's a couple of places to get you started...

http://www.milehighpts.com/engine_bay_dress_up.htm

http://www.pt-tuning.com/ShinyStuff/...Main-Page.html

http://www.autotrucktoys.com/stores/..._ID=375&DID=55



__________________
Rules of the forum have been updated as of *07/07/2019* Please read them over.

- All decisions by the Moderator are semi-permanent, can and may be changed at his discretion but definitely will be the final word. Any action performed by the Administrator or Moderators are not to be discussed on the forum.
Reply With Quote
  #3 (permalink)  
Old 02 Dec 2003, 01:20 am
Fanatic Cruiser
 
Join Date: Sep 2001
Location: California, USA.
Posts: 605
Default

Quote:
quote:Originally posted by MEDIAN

I HAVE A K&N INTAKE AND I AM LOOKING FOR SOME TYPE OF COVER OR SHIELD IN CHROME. DOES ANYBODY MAKE CUSTOM CHROME ENGINE PIECES OR ARE THERE ANY MADE ALREADY?
I don't know of any specifically made for the K & N FIPK if that is what you are looking for. I'd be interested as well if someone has a source.
__________________
Enjoy the cruise.

Don aka Basset Hound


Pics at: http://members4.clubphoto.com/don284358/
Reply With Quote
  #4 (permalink)  
Old 02 Dec 2003, 03:00 pm
Cool Cruiser
 
Join Date: Jun 2003
Location: AHWATUKEE, AZ
Posts: 343
Default

im not sure were u can buy that stuff, but u can also take some of that plastic stuff of yourengine and take it to a plastic chromer, butit its hella hard to find someone that can do it, took me 2 years to find someone lol[8)]
__________________

\"You All Laugh Because I\'M Different, I Laugh Because YOU\'RE All The Same!\"
Reply With Quote
  #5 (permalink)  
Old 02 Dec 2003, 10:26 pm
Regular Cruiser
 
Join Date: Apr 2003
Location: Herndon, VA, USA.
Posts: 101
Default

I used one of these to cover the Cone of the K & N Filter it is installed using the hose clamp where the filter connect to the hose
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2446383182
This is on ebay and they are all the same...Take a look
Reply With Quote
  #6 (permalink)  
Old 03 Dec 2003, 12:11 am
Fanatic Cruiser
 
Join Date: Sep 2001
Location: California, USA.
Posts: 605
Default

Can you post a picture of it on your PT Cruiser?
__________________
Enjoy the cruise.

Don aka Basset Hound


Pics at: http://members4.clubphoto.com/don284358/
Reply With Quote
  #7 (permalink)  
Old 03 Dec 2003, 12:22 am
Dedicated Cruiser
 
Join Date: Oct 2003
Location: Jacksonville, NC, USA.
Posts: 2,612
Default

Ditto Basset Hound, pic please.
__________________

2002 Inferno Red PT Limited
Photos and more at: http://www.randgraphics.org/PT_Cruiser/demos/index.htm
Mercedes Wiki
Reply With Quote
  #8 (permalink)  
Old 03 Dec 2003, 07:56 am
Regular Cruiser
 
Join Date: Apr 2003
Location: Herndon, VA, USA.
Posts: 101
Default

I no longer have that intake on my car - go to ebay and take a look
Reply With Quote
  #9 (permalink)  
Old 03 Dec 2003, 09:06 pm
Senior Cruiser
 
Join Date: Sep 2002
Location: Just south of the Mason/Dixon line
Posts: 1,713
Default

That price doesn't seem to bad so far[:I] I looked at one made by INJEN a few years back but they wanted like $50 for it. A tad to much back then
__________________
.....................................
'03 GT base w/175k and a 2 speed autostick (read: trans is shot) and powered by a hybrid MOPAR S3 with DSP untuned
1st Forward Motion E1 powered PTGT w/Psi-Fi Power pack fuel tuner back in '07
FS: '03 GT Elec Blue w/rear suicide doors or '03 auto PCM, S3 turbofold, WGA, 3.5" o2 & 3" DP - make offer
Reply With Quote
  #10 (permalink)  
Old 11 Dec 2003, 11:37 pm
Fanatic Cruiser
 
Join Date: Sep 2001
Location: California, USA.
Posts: 605
Default

I've seen the picture on eBay, but it doesn't look like it will fit in the heat shield of the K & N FIPK. That's why I asked for a picture.
__________________
Enjoy the cruise.

Don aka Basset Hound


Pics at: http://members4.clubphoto.com/don284358/
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Review: $2200 for a NA replacement engine PT Ctown General PT Cruiser Discussions 8 24 Jul 2006 01:08 pm
2003 chromed out GT for sale bluebluegt Classifieds: For Sale/Trade 0 30 Jan 2005 09:37 pm
2004 PT Cruiser Model Information skylight PT Cruiser News and Rumors 5 19 Jul 2004 09:51 am
Check this out gonzomania Testing 5 10 May 2004 04:51 pm
engine chrome? Punch Exterior & Interior Styling 1 05 Sep 2003 05:35 pm


All times are GMT -5. The time now is 05:47 pm.




Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
LinkBacks Enabled by vBSEO 3.6.0 PL2 © 2011, Crawlability, Inc.
vB.Sponsors