PT Cruiser Forum  
Advertisements
       

Go Back   PT Cruiser Forum > General Forums > Exterior Accessories Forum

PT Cruiser Forum

Advertisements
Nice $9 MOD

 
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 17 Apr 2004, 10:02 pm
Dedicated Cruiser
 
Join Date: Jan 2003
Location: Washington State, USA.
Posts: 2,525
Default Nice $9 MOD

Covering those stock black plastic washer nozzles is easy with the
Chrome Plated Washer Nozzle Covers available from the PT Warehouse: http://www.ptwarehouse.com/accessori...ccessories.htm
These covers have a nice design that goes well with the lines of the
PT Cruiser. [8D]

Reply With Quote
  #2 (permalink)  
Old 18 Apr 2004, 12:00 am
Young Cruiser
 
Join Date: Apr 2004
Location: Ontario, Canada.
Posts: 60
Default

Quote:
quote:Originally posted by Gary04GT

Covering those stock black plastic washer nozzles is easy with the
Chrome Plated Washer Nozzle Covers available from the PT Warehouse
I like them, but I'm new to MODS. How are they applied?

BTW, I love your car
__________________
2003 Lt. Almond
Touring Edition
Reply With Quote
  #3 (permalink)  
Old 18 Apr 2004, 12:38 am
Dedicated Cruiser
 
Join Date: Jan 2003
Location: Washington State, USA.
Posts: 2,525
Default

Thanks, Lucretia. They come with 3-M double-stick adhesive included--no holes to drill and easy installation. Just make sure the surface is clean and the temperature is above 50 degrees F. If you ever want to remove them just use a hair-dryer to heat the adhesive tape and off they come. Then clean the surface, polish/wax the paint--it's like they were never on the car. Good luck.
Reply With Quote
  #4 (permalink)  
Old 18 Apr 2004, 04:15 pm
Young Cruiser
 
Join Date: Apr 2004
Location: Ontario, Canada.
Posts: 60
Default

Thanks for the info. I think I'll have to give them a try!
__________________
2003 Lt. Almond
Touring Edition
Reply With Quote
  #5 (permalink)  
Old 18 Apr 2004, 06:28 pm
Obsessed Cruiser
 
Join Date: Sep 2001
Posts: 27,744
Default

Gary,

...or the real ones that light up and a little extra flames from Hot Rod Works.

__________________
Rules of the forum have been updated as of *07/07/2019* Please read them over.

- All decisions by the Moderator are semi-permanent, can and may be changed at his discretion but definitely will be the final word. Any action performed by the Administrator or Moderators are not to be discussed on the forum.
Reply With Quote
  #6 (permalink)  
Old 18 Apr 2004, 07:34 pm
Dedicated Cruiser
 
Join Date: Jan 2003
Location: Washington State, USA.
Posts: 2,525
Default

Those are very nice, CREWZIN. [8D] However, I understand that they are a PITA to install as you have to remove the under-hood insulation cover which is [u]no easy job</u>.
Reply With Quote
  #7 (permalink)  
Old 18 Apr 2004, 08:07 pm
Obsessed Cruiser
 
Join Date: Sep 2001
Posts: 27,744
Default

Gary,

Your right about part of the underhood blanket having to be removed (which isn't too bad) but now I have a bigger problem. The underhood stainless steel doesn't come off without a heck of a lot of trouble. It's glued and screwed on and the bulbs on the washers aren't replaceable (the whole light has to be replaced). So I've put the washer lights on a toggle switch and only use them on special occasions so hopefully they will last for years.

__________________
Rules of the forum have been updated as of *07/07/2019* Please read them over.

- All decisions by the Moderator are semi-permanent, can and may be changed at his discretion but definitely will be the final word. Any action performed by the Administrator or Moderators are not to be discussed on the forum.
Reply With Quote
  #8 (permalink)  
Old 18 Apr 2004, 10:00 pm
Fanatic Cruiser
 
Join Date: May 2003
Location: Rhode Island.
Posts: 950
Default

Gary,
I have those covers.
Can't decide if I want to mount them tho.
__________________

2003 GT Inferno Red,5-spd,Eibach Springs,Koni Sport Adjustables, Eibach front and rear Sway Bars, Mopar Stage 1,Mopar BOV,Custom 2.5\" Dual Tip Exhaust (Magnaflow),Hurst Short Throw Shifter, Pioneer DEH6500 Headunit, RF Punch 300 and 301 Amps,RF 12\" Sub and MB Quart Reference and Premium Speakers,Ronal RT 17x7.5\'s with Michelin Pilot Sport 225/45ZR17s, Koni Adjustible shocks, Keystone single scoop, GT Airraid Intake, Mopar Ground Effects
Homepage:
http://www.cardomain.com/id/ptgtredman

http://blueman.ptenthusiasts.net/index.html
Reply With Quote
  #9 (permalink)  
Old 18 Apr 2004, 10:21 pm
Cool Cruiser
 
Join Date: Dec 2003
Location: Gambrills, MD, USA.
Posts: 298
Default

PTGT Redman, your hood looks perfect the way it is. That is my favorite aftermarket hood.
__________________
Marty from MD
Black GT 03, BTG cat/back duals, rocket taillights, BTG shock strut bar, & Blane hood struts
Reply With Quote
  #10 (permalink)  
Old 18 Apr 2004, 10:23 pm
Dedicated Cruiser
 
Join Date: Jan 2003
Location: Washington State, USA.
Posts: 2,525
Default

Quote:
quote:Originally posted by PTGT Redman

Gary,
I have those covers.
Can't decide if I want to mount them tho.
Think you should install them since you have them. If you don't like them they are easy to remove. They were a little bigger than I had expected by I like "the look"! [8D] Besides--they act like "little shark fins" on your hood by cutting through the air better than the stock ones, thus, giving you improved performance! [)] [8)]
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
New TSW rims, look nice! Wicked_PT Exterior Accessories Forum 5 03 Feb 2006 10:44 am
Nice surprise! Gary04GT General PT Cruiser Discussions 14 26 Aug 2005 09:28 pm
A nice suprise turbomangt General PT Cruiser Discussions 3 19 Jun 2004 10:15 am
Nice visit with member turbomangt The Detail Shop 2 03 Dec 2003 10:28 pm
Nice Visit with Steve turbomangt General PT Cruiser Discussions 8 18 Jul 2003 05:49 pm


All times are GMT -5. The time now is 02:43 am.




Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
LinkBacks Enabled by vBSEO 3.6.0 PL2 © 2011, Crawlability, Inc.
vB.Sponsors