PT Cruiser Forum  
Advertisements
       

Go Back   PT Cruiser Forum > General Forums > Exterior Accessories Forum

PT Cruiser Forum

Advertisements
Performance Design Manufacturing Grille

 
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 20 Apr 2004, 07:37 pm
Fanatic Cruiser
 
Join Date: Jan 2004
Location: McDonough (Atlanta), Georgia, USA.
Posts: 600
Default Performance Design Manufacturing Grille

I just purchased a PDM polished 2 piece (upper and lower) grille off of Ebay. Does anyone own or heard about Performance Design grilles?
Reply With Quote
  #2 (permalink)  
Old 20 Apr 2004, 08:09 pm
Fanatic Cruiser
 
Join Date: May 2003
Location: Rhode Island.
Posts: 950
Default

No. But if you have pics and can give a review on quality and fitment, that'd be great.
Always looking for new grille manufacturers.
Is it billet or plastic?
__________________

2003 GT Inferno Red,5-spd,Eibach Springs,Koni Sport Adjustables, Eibach front and rear Sway Bars, Mopar Stage 1,Mopar BOV,Custom 2.5\" Dual Tip Exhaust (Magnaflow),Hurst Short Throw Shifter, Pioneer DEH6500 Headunit, RF Punch 300 and 301 Amps,RF 12\" Sub and MB Quart Reference and Premium Speakers,Ronal RT 17x7.5\'s with Michelin Pilot Sport 225/45ZR17s, Koni Adjustible shocks, Keystone single scoop, GT Airraid Intake, Mopar Ground Effects
Homepage:
http://www.cardomain.com/id/ptgtredman

http://blueman.ptenthusiasts.net/index.html
Reply With Quote
  #3 (permalink)  
Old 21 Apr 2004, 12:35 am
Fanatic Cruiser
 
Join Date: Jan 2004
Location: McDonough (Atlanta), Georgia, USA.
Posts: 600
Default

It's polished billet aluminum.
__________________
Reply With Quote
  #4 (permalink)  
Old 21 Apr 2004, 08:53 am
Senior Cruiser
 
Join Date: Apr 2003
Location: Jacksonville, FL, USA.
Posts: 1,235
Send a message via AIM to sakigt
Default

Looks like youre the guina pig
__________________

14.67 @ 94.5 <--- Self Proclaimed Fastest East Coast PT with Black wheels!!!
Reply With Quote
  #5 (permalink)  
Old 21 Apr 2004, 10:34 am
Senior Cruiser
 
Join Date: Dec 2003
Location: Tallahassee, FL, USA.
Posts: 1,984
Default

Hope you didn't pay too much for it. If its not right that is.
__________________
Kingkole02
Just Cruisin, 03 N/A auto. TE Steel Blue w/ pearl coat & chrome package. Too many extras to list, see pics
Reply With Quote
  #6 (permalink)  
Old 21 Apr 2004, 11:05 am
Cool Cruiser
 
Join Date: Sep 2003
Location: Lewisville, TX, USA.
Posts: 300
Default

I have one on my Cruiser and love it.....it looks like the Stull billet grill, except the horizontal lines of the grill are much closer to each other....go it from Autotrucktoys.com
I was going to put a picture of my ride on here but cardomain seems to be down....I will attach my pic later...
BigPhil
__________________
2003 Base Model
Tribal Warrior

Reply With Quote
  #7 (permalink)  
Old 21 Apr 2004, 02:04 pm
Fanatic Cruiser
 
Join Date: Jan 2004
Location: McDonough (Atlanta), Georgia, USA.
Posts: 600
Default

BigPhil,
Was it easy to install? Is it a replacement for the original grille, or is it an overlay? Any drilling involved?
__________________
Reply With Quote
  #8 (permalink)  
Old 21 Apr 2004, 03:36 pm
Fresh Cruiser
 
Join Date: Jul 2003
Location: Scotland, CT, USA.
Posts: 47
Default

I have the same grill and its a very nice fit. Just need someone with small hands to help put the bottom piece on.

__________________

http://ptcw.truckmoxie.com/mygallery.ten?id=3466
Reply With Quote
  #9 (permalink)  
Old 21 Apr 2004, 04:08 pm
quicksilverdon's Avatar
Obsessed Cruiser
 
Join Date: Nov 2003
Location: Felton, Delaware
Posts: 20,501
Default

It appears to be as good as any others I've seen - I have the E&G "billet" one - "raw" aluminum, not chrome, I like it on my silver.
Reply With Quote
  #10 (permalink)  
Old 22 Apr 2004, 12:01 pm
Cool Cruiser
 
Join Date: Sep 2003
Location: Lewisville, TX, USA.
Posts: 300
Default


Here is what it looks like on mine...now, i only have the top part on now baecause of my new front end....you have to drill into the front bumper to get the bracket to sty on for the top part of the grill....have to drill 4 holes in the bottom part of the exisintg factory grill to lay the new portion of the grill over the existing facotry bottom piece.....be sure and paint the lower part of the grill black and behind the top part of the grill black so you can't see the white behind it when you finish the install...

BigPhil
__________________
2003 Base Model
Tribal Warrior

Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Hybrid Performance strangelove General PT Cruiser Discussions 1 04 Apr 2006 11:14 am
PT- 2.4 L Turbo: Performance Kit IS SOLD! JeffreyPT2003 Canada PT Forum 1 08 Mar 2005 07:44 pm
The JET PERFORMANCE CHIP is amazing... Gary04GT Tech & Performance Forum 9 13 May 2004 12:00 am
SRT-4 Mopar Performance Parts skylight PT Cruiser News and Rumors 13 23 Jul 2003 07:26 pm
Mopar Performance Parts Warranty Dalite Turbo Performance 0 07 Jun 2003 10:44 pm


All times are GMT -5. The time now is 11:17 am.




Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
LinkBacks Enabled by vBSEO 3.6.0 PL2 © 2011, Crawlability, Inc.
vB.Sponsors