PT Cruiser Forum  
Advertisements
       

Go Back   PT Cruiser Forum > General Forums > Exterior Accessories Forum

PT Cruiser Forum

Advertisements
Photos of installation of emblem with 080069 3M PRESS-IN-PLACE emblem adhesive

 
Like Tree5Likes

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 15 Aug 2015, 11:03 am
ptprice's Avatar
Dedicated Cruiser
 
Join Date: Nov 2012
Location: Ormond Beach, Fl. 32174
Posts: 2,163
Default Photos of installation of emblem with 080069 3M PRESS-IN-PLACE emblem adhesive

As promised I'm posting the photos as a "how to" for the 3M 08069 PRESS-IN-PLACE emblem adhesive. As you can see from my results it's a great product that can be used on old emblems that have been removed with a steel fishing leader still have the sponge backing. (a successful trip to pull-n-save!) I came out $200 ahead on this project over the cost of new emblems!
1, adjusting emblem line up held in place with low aggression duct tape on face side, 2, lined up emblem with the 08069 PRESS-IN-PLACE adhesion tape with its protective cover in place on the sponge backing of the emblem, 3,peeling the 08069 tape backing from the emblem, 4, critical adjustments of emblem letters (this is the sticky stage that really needed a steadier hand than mine), 5, 08069 tape successfully transferred and letters aligned, 6, clean surface. I used diluted goo-gone, then diluted mild dish detergent, then a water rinse, 7, cleaning surface, wiping down dry with a soft cloth, 8, setting guide tapes, 9, positioning emblem, 10, final results.
Happy PTin' ptprice
Attached Images
File Type: jpg emblem istallation with 3M 08069 PRESS-INPLACE emblem adhesive 003.jpg (115.0 KB, 42 views)
File Type: jpg emblem istallation with 3M 08069 PRESS-INPLACE emblem adhesive 002.jpg (98.1 KB, 22 views)
File Type: jpg emblem istallation with 3M 08069 PRESS-INPLACE emblem adhesive 004.jpg (110.3 KB, 17 views)
File Type: jpg emblem istallation with 3M 08069 PRESS-INPLACE emblem adhesive 005.jpg (91.2 KB, 14 views)
File Type: jpg emblem istallation with 3M 08069 PRESS-INPLACE emblem adhesive 007.jpg (97.0 KB, 14 views)
File Type: jpg emblem istallation with 3M 08069 PRESS-INPLACE emblem adhesive 008.jpg (76.5 KB, 14 views)
File Type: jpg emblem istallation with 3M 08069 PRESS-INPLACE emblem adhesive 009.jpg (87.1 KB, 15 views)
File Type: jpg emblem istallation with 3M 08069 PRESS-INPLACE emblem adhesive 011.jpg (83.2 KB, 19 views)
File Type: jpg emblem istallation with 3M 08069 PRESS-INPLACE emblem adhesive 012.jpg (82.7 KB, 23 views)
File Type: jpg emblem istallation with 3M 08069 PRESS-INPLACE emblem adhesive 013.jpg (83.8 KB, 37 views)
buddyiramae likes this.
Reply With Quote
  #2 (permalink)  
Old 15 Aug 2015, 11:40 am
LionPT's Avatar
Veteran Cruiser
 
Join Date: May 2014
Location: Central Florida
Posts: 4,344
Default Re: Photos of installation of emblem with 080069 3M PRESS-IN-PLACE emblem adhesive

I hate to tell you this...but pic 13, the 'N' is upside down in "Edition"
rob342 likes this.
__________________

2006 Touring Edition in Cool Vanilla...aka/Ghost
Reply With Quote
  #3 (permalink)  
Old 15 Aug 2015, 12:06 pm
ptprice's Avatar
Dedicated Cruiser
 
Join Date: Nov 2012
Location: Ormond Beach, Fl. 32174
Posts: 2,163
Default Re: Photos of installation of emblem with 080069 3M PRESS-IN-PLACE emblem adhesive

Lion PT, thanks, "GOOD EYES". Fortunately I have an extra"N". It'll give me a chance to test and see just how well this 08069 stick-um holds.
I'm not gonna change it today as Danica Patrick is racing at Ohio in the Sprint NASCAR Series this afternoon and I'm a fan of her's and all the members of Stewart-Haas Racing. Happy PTin' ptprice
Reply With Quote
  #4 (permalink)  
Old 16 Aug 2015, 09:11 am
ptprice's Avatar
Dedicated Cruiser
 
Join Date: Nov 2012
Location: Ormond Beach, Fl. 32174
Posts: 2,163
Default Re: Photos of installation of emblem with 080069 3M PRESS-IN-PLACE emblem adhesive

LionPT, I got the "N" in LIMITED EDITION corrected yesterday. (See attached) Thanks for spotting it! In removing the upside down "N" the 08069 3M PRESS-IN-PLACE adhesive emblem tape proved quite aggressive but I was able to remove the offending letter, clean the site and the letter backing, install a new application of the 08069 tape to the "N" and successfully reapply the "N" in place, right side up!
I mentioned I couldn't do the correction yesterday as I was waiting for the NASCAR race to cheer for Danica Patrick!
I later discovered the race is scheduled for 8/16/2015, today, Sunday. I discovered this to my embarrassment after complaining to my cable provider for their lack of supplying the race I wanted to see!
I just gained a day thinking yesterday was Sunday. Down here in Florida that's called a "senior moment!" I seem to have my share of them, but it makes life exciting and I can get away with thing I couldn't 40 years ago!
Happy PTin' ptprice
LionPT likes this.
Reply With Quote
  #5 (permalink)  
Old 16 Aug 2015, 12:49 pm
Obsessed Cruiser
 
Join Date: Sep 2001
Posts: 27,744
Default Re: Photos of installation of emblem with 080069 3M PRESS-IN-PLACE emblem adhesive

You also said she's racing in OHIO yesterday and it's actually in Michigan this afternoon at 2:30 EST.


NASCAR Michigan 2015: Start time, TV schedule and live stream for Pure Michigan 400 - SBNation.com

HENDRICK Motorsports fan
__________________
Rules of the forum have been updated as of *07/07/2019* Please read them over.

- All decisions by the Moderator are semi-permanent, can and may be changed at his discretion but definitely will be the final word. Any action performed by the Administrator or Moderators are not to be discussed on the forum.

Last edited by CREWZIN; 16 Aug 2015 at 12:54 pm.
Reply With Quote
  #6 (permalink)  
Old 16 Aug 2015, 01:26 pm
Handy_Cruiser's Avatar
Obsessed Cruiser
 
Join Date: Oct 2013
Location: Arkansas
Posts: 10,335
Default Re: Photos of installation of emblem with 080069 3M PRESS-IN-PLACE emblem adhesive

Quote:
Originally Posted by ptprice View Post
LionPT, I got the "N" in LIMITED EDITION corrected yesterday. (See attached) Thanks for spotting it! In removing the upside down "N" the 08069 3M PRESS-IN-PLACE adhesive emblem tape proved quite aggressive but I was able to remove the offending letter, clean the site and the letter backing, install a new application of the 08069 tape to the "N" and successfully reapply the "N" in place, right side up!
I mentioned I couldn't do the correction yesterday as I was waiting for the NASCAR race to cheer for Danica Patrick!
I later discovered the race is scheduled for 8/16/2015, today, Sunday. I discovered this to my embarrassment after complaining to my cable provider for their lack of supplying the race I wanted to see!
I just gained a day thinking yesterday was Sunday. Down here in Florida that's called a "senior moment!" I seem to have my share of them, but it makes life exciting and I can get away with thing I couldn't 40 years ago!
Happy PTin' ptprice
Those are really good photos. You aught to use them and made a nice footer for yourself like some of use have.
__________________
Reply With Quote
  #7 (permalink)  
Old 16 Aug 2015, 03:37 pm
ptprice's Avatar
Dedicated Cruiser
 
Join Date: Nov 2012
Location: Ormond Beach, Fl. 32174
Posts: 2,163
Default Re: Photos of installation of emblem with 080069 3M PRESS-IN-PLACE emblem adhesive

Handy Cruiser, Thanks, I'd like to do that but I don't know how!??? Where do I go on the Forum for that feature?
SOO BIG"S gonna be around for a long time. Probably longer than me. We have a lot of fun together! Here's a couple of photos of SOO BIG and me, the good lookin' one without any wheels!
I enjoy contributing to the Forum.
Happy PTin', ptprice
Attached Images
File Type: jpg 2005 pt cruiser 003.jpg (90.6 KB, 14 views)
File Type: jpg corrected N in LIMITED EDITION emblem 001.jpg (89.8 KB, 15 views)
File Type: jpg webb site photo.jpg (96.9 KB, 15 views)
Gkon likes this.
Reply With Quote
  #8 (permalink)  
Old 16 Aug 2015, 03:44 pm
Obsessed Cruiser
 
Join Date: Sep 2001
Posts: 27,744
Default Re: Photos of installation of emblem with 080069 3M PRESS-IN-PLACE emblem adhesive

Go to "User CP" on the top of the forum. then hit "Edit Signature" and follow the instructions to download a small picture into your signature block.
__________________
Rules of the forum have been updated as of *07/07/2019* Please read them over.

- All decisions by the Moderator are semi-permanent, can and may be changed at his discretion but definitely will be the final word. Any action performed by the Administrator or Moderators are not to be discussed on the forum.
Reply With Quote
  #9 (permalink)  
Old 16 Aug 2015, 06:30 pm
ptprice's Avatar
Dedicated Cruiser
 
Join Date: Nov 2012
Location: Ormond Beach, Fl. 32174
Posts: 2,163
Default Re: Photos of installation of emblem with 080069 3M PRESS-IN-PLACE emblem adhesive

Thanks Crewzin, I'll try it when I've shifted out of my "senior moments" this weekend!
I did find Danica at the Michigan 400 and watched. She was just in the middle of the pack today. Not as good as last week. Go STEWART HAAS! Happy PTin', ptprice
Reply With Quote
  #10 (permalink)  
Old 16 Aug 2015, 06:36 pm
Obsessed Cruiser
 
Join Date: Sep 2001
Posts: 27,744
Default Re: Photos of installation of emblem with 080069 3M PRESS-IN-PLACE emblem adhesive

She's way above the "middle of the pack".

__________________
Rules of the forum have been updated as of *07/07/2019* Please read them over.

- All decisions by the Moderator are semi-permanent, can and may be changed at his discretion but definitely will be the final word. Any action performed by the Administrator or Moderators are not to be discussed on the forum.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Emblem 2008ptcruzrtouring General PT Cruiser Discussions 11 06 Mar 2015 10:42 pm
Pt Cruiser Emblem Jake12 Exterior Accessories Forum 2 14 May 2004 05:22 pm
GT Emblem Gazoo Exterior & Interior Styling 1 02 Feb 2004 03:30 pm
Looking for Chrysler emblem AndyKay Classifieds: Want To Buy 1 01 Jul 2003 04:53 pm
Holographic emblem OVcruzn Interior Accessories Forum 1 16 May 2003 06:36 am


All times are GMT -5. The time now is 05:38 pm.




Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
LinkBacks Enabled by vBSEO 3.6.0 PL2 © 2011, Crawlability, Inc.
vB.Sponsors