Is there anywhere that i can get this front bumper and possibly the rear rollpan?

[texas2002cruiser]

While i do like the many styles of aftermarket front bumpers and rear rollpans.

I don't think i've seen a pair that's nicer than these:



[img] https://www.conceptcarz.com/images/C...-800.jpg]/img]







i know they make dual exhaust rollpans, but most of them don't have those tail lights. Which is fine, but i really would like to get that front bumper somewhere. Even if i have to get it made.

thanks for looking.

[rob302]

that was a PT concept car from 2000. idk i don't think anyone ever made a kit like that. you'd likely need it custom made, and you'd likely want the rest of the body changed so it had those odd dual fender flares

https://www.caranddriver.com/news/ch...ept-auto-shows

[wwpptc]

The front and rear fascia were made by PTeazer for the PT Cruiser panel van concept that you posted pics of and the front fascia was used on the "SUPER CRUISER" that was making the show car circuit at around the same time.



It was also used on this original GT concept that was also traveling the show circuits.



This is the original intake design for our turbo engines.



I don't recall seeing that particular front or rear fascia for sale to the general public since then. Maybe if you contact RAY at PTeazer he might run you off a pair "IF" he still has the molds.

Bob at California cruisers also sold a front fascia that was similar to these that he marketed as both the "SHARK" and the "RALLY SPORT" line.



The fender flares are the ones that have been offered by PTeazer from the very beginning. Ray has sold hundreds of sets of them over the years.










Jerry

[texas2002cruiser]

thanks for the response, i tried going to the pteazer site. But it says it's under maintenance or something.

[rob302]

https://facebook.com/profile.php?id=100000982364960

[wwpptc]

Ray is apparently going through some changes with his website.

https://pteazer.com/index.php?


Jerry

[soonercruiser]

If you could find a more flat, solid Roll pan, like this one, you could cut out and mold-in a set of round tail lights.

https://www.ebay.com/p/CHRYSLER-PT-C...8644757&chn=ps

https://www.octanemotorsports.com/06...xoCvP8QAvD_BwE

Here's a Gen 2 Xenon Front Fascia with an open intercooler area....but I think they want too much for it.
I couldn't find this for a Gen 1. And, you didn't specify which generation Cruiser you have to work with.

https://www.ebay.com/itm/Chrysler-PT...8AAOSw-wJaDGp-

This EVO Kit is about all I can find with a n open intake area for the intercooler.

https://www.andysautosport.com/produ...s__100218.html

[rob302]

Originally Posted by soonercruiser

If......you could cut out and mold-in a set of round tail lights.

HOW though? fiberglass is easy to modify but it's junk for a part on the lower half of a car. polyurethane(like you list) is durable, but how do you add to it? (not calling you out, just trying to learn)

[wwpptc]

Originally Posted by soonercruiser

If you could find a more flat, solid Roll pan, like this one, you could cut out and mold-in a set of round tail lights.

https://www.ebay.com/p/CHRYSLER-PT-C...8644757&chn=ps

https://www.octanemotorsports.com/06...xoCvP8QAvD_BwE

Here's a Gen 2 Xenon Front Fascia with an open intercooler area....but I think they want too much for it.
I couldn't find this for a Gen 1. And, you didn't specify which generation Cruiser you have to work with. As his name implies, his PT is a 2002.

https://www.ebay.com/itm/Chrysler-PT...8AAOSw-wJaDGp-

This EVO Kit is about all I can find with a n open intake area for the intercooler.

https://www.andysautosport.com/produ...s__100218.html

teaxas2002cruiser's PT is a 2002, so no need to allow for a intercooler.


Jerry

[texas2002cruiser]

Originally Posted by soonercruiser

If you could find a more flat, solid Roll pan, like this one, you could cut out and mold-in a set of round tail lights.

https://www.ebay.com/p/CHRYSLER-PT-C...8644757&chn=ps

https://www.octanemotorsports.com/06...xoCvP8QAvD_BwE

Here's a Gen 2 Xenon Front Fascia with an open intercooler area....but I think they want too much for it.
I couldn't find this for a Gen 1. And, you didn't specify which generation Cruiser you have to work with.

https://www.ebay.com/itm/Chrysler-PT...8AAOSw-wJaDGp-

This EVO Kit is about all I can find with a n open intake area for the intercooler.

https://www.andysautosport.com/produ...s__100218.html

i have an 02 with the regular front bumper.

i'm thinking of doing something with a front bumper that i can get at a junkyard. let's see if i can make it work.

Originally Posted by wwpptc

It was also used on this original GT concept that was also traveling the show circuits.




Jerry

what a damn shame, that chrysler didn't go with this front bumper.