pteazer roll pan .... geesh

[Candyman]

Hey Ray,

No worries man! Their are always a few guys in the crowd that are going to question or complain about something. Your parts are well established as some of the best parts available for the PT anywhere bar none!

I dare anyone who thinks otherwise to go to a PT Show, walk up to any PT Owner with PTeazer Parts on their Ride, and ask them if they are unhappy! Ask them if they have had anything but a great experience with the Parts, Ray, or anything negative from PTeazer in any way!!!

Their are tons of Forums I can direct you to that bash other Competition into the ground for poor Business Practices, and very cheap, and poor fitting parts, but PTeazer is in a whole other class all together!

For any of you who don't know Ray, he is the Real Deal, as are his parts! If you want a good fit, and high end aftermarket part, give Ray a call as many people with Custom PT's have been doing for many years! If you want to wrestle with poor fitment, and trying to fix defects in low end parts that were poorly molded, then their are plenty of other products on the market!

I'll leave you on one last note, isn't it funny how you can find many trusted Aftermarket Suppliers like Maggie at Race & Street, or Mitch at Cruiser Motor Sport proudly carry PTeazer Parts, but the nobody carries any parts from any other leading competitor other than Xenon? Most every time you see a high end award winning PT, how many times do you not see a PTeazer Grille, Front End, or Roll Pan on it? If you have ever attended a PT Show, how many PT's can you count that do "not" have any PTeazer Parts on it in some form?

Thats my two cents anyway! Please do me a favor, do a little research, talk to people who own the Products, and then come back and talk about PTeazer Parts!

Go easy, and I will catch you later!

Candyman

[Pteazer]

Thanks Candy man, let the good times roll. hey do you ever just notice your cruiser sitting there sometimes and it gives you a good feeling inside. Me too. keep on cruizin, Ray Pteazer.

[PT_Cuda]

Originally Posted by soonercruiser

Cal Cruisers is getting "rapped on" pretty hard in several forums.
From those bad experiences, I'd probably avoid them if you can.....unless you are right there in L.A. area to stay on top of them when THEY install their part.

Its a bad rep they earned by scamming and screwing just about everyone they do business with.

PTeazer could if they wanted to tell stories of things they have rebuilt after PTBob did his best destruction work on a few cars in CA. I say this since I heard the story straight from the owner, not rumor - fact.

RUN HARD, RUN FAST AWAY FROM So. Cal or California Cruisers.

[slayerdarkcross]

Its best for Ray to only Acknowledge what bob has done rather than promote it.
Any mention of your opponents gives them credit when you should sell your own name.
However stories of failed projects will work better as long as you don't say why it became that way.
Gotta keep things positive! =P

[PT_Cuda]

Originally Posted by slayerdarkcross

Its best for Ray to only Acknowledge what bob has done rather than promote it.
Any mention of your opponents gives them credit when you should sell your own name.
However stories of failed projects will work better as long as you don't say why it became that way.
Gotta keep things positive! =P

Sorry not when it comes to PTbob, he has destroyed his rep and screwed so many people there is no way to stay positive when speaking of him or his shop. Myself included of the many that had to deal with his shoddy workmanship, messed up money handling and just straight up not having parts delivered that were paid for.

[slayerdarkcross]

I've met the guy myself and I know his story. But ray can't promote bobs failures.

[PT_Cuda]

Originally Posted by slayerdarkcross

I've met the guy myself and I know his story. But ray can't promote bobs failures.

Why I phrased it the way I did, he could talk.

[shadow_otw]

Over the years, I have had two full kits from PTeazer.

My fiest was the origional fiberglass set that still used the upper grill, and a full fiberglass roll pan.

The kit I have on my car now is a smoothie Roadstar grill setup. I had one problem where the mounting tabs on the grill surround cracked and broke. One call to PTeazer and they shipped me a new one at no charge.

I stand behind their service, their parts, and the man that designed them.

[Pteazer]

Originally Posted by Cartman

ok, im going to jump in here. on the fit of the pteazer roll pan, YEs, they are one of the nicest fitting bumper covers out there, only slight cleanup needed for nice fitment. but, I would NEVER put one of these on my PT. ALL of the collision information given on their website is total and complete bull and will probably cost someone their life, at least their car. do not believe that replacing an engineered reinforcement with absorber that is designed to absorb collison engery with a 1INCH DIAMETER STEEL PIPE is a good thing. the bar sits further in than the liftgate, meaning that the reinforcement will not protect the liftgate as mentioned in thier site. if you install this, be aware that in a rear end collision, even a light one, your car will suffer ALOT more damage than with a factory bumper setup. rear body panel replacements and liftgates are not CHEAP on these cars. If i could, I would have their collision information BANNED from the internet and replaced with a WARNING about increased damage potential and increased risk on injury. as for the front bumperette kits......death trap. removing the front reinforcement affects AIRBAG TIMING, meaning that you will bounce off your steering wheel before or after the airbag goes off in the event of a front end collision. the 1 INCH STEEL BAR does NOT negate the damage like they claim it does. sorry to go off like this, but being a collision tech, i have to sound the warning bell when something aint kosher.

It sucks how one uninformed man can make such harmfull statements about the safty of my parts and without having seen them hold up in an accedent. I have seen more than a hundred crashed pts through my bodyshop and have many endorsements from insurance esimaters and customers to the amazing way Pteazer parts compaired to factory in an accident.WE HAVE HAD ZERO COMPLAINTS IN ALLMOST TEN YEARS.Its a free country at least for the moment,Ray, pteazer.