have you ever heard

[CruzinAlong]

Hi Everyone,

It's been a while since I was on here last and posted a few questions, Hope all is well.


Has anyone of you heard of a Target Magnet? My check engine light is on and the mechanic said it was a Taget Magnet and it's missing a tooth.

I was having problems with the car not starting the results were the camshaft sensor and the harness plug were damaged and that was causing the car not to start all the time.

Has anyone else had this problem? I have a 2003 with 44,000

Thanks for taking the time to read.


Trish

[quicksilverdon]

Never heard of the specifics "target magnet"...
What was error code?
From the rest of your post (hard starting, camshaft sensor), I deduce that it was ignition-related. The way sensors work, is the crankshaft and camshaft have magents that as the shafts rotate tell sensors where the pistons are to determine when to trigger an ignition spark.
Hope that helps.

[CREWZIN]

Trish,

I had the harness from the camshaft sensor burn apart after it came loose from the mounting tab. The harness dropped to a place where it rubbed against the half shaft. When there's no more signal from camshaft, the car doesn't run period. I guess you could have a loose harness plug that would give you interrupted signals.

As far as the "Target Magnet", the only thing I can find is that Target Magnets are used for speed sensors. The magnetic relay gets it's input from a rotating object with teeth and each tooth sends a signal thru the magnetic sensor for speed sensing.

Maybe someone with more knowledge of this type of arrangement in the PT Cruiser will come along and give you a better response.

[CruzinAlong]

QuickSilver & Crewzin-


Thanks for your replies, I only the basics of cars.

Take care-

Trish

[bobs turbo pt]

never heard of the target magnet ??[:I]

[68Goldfish]

Chalk me up as another one that's never heard of a target magnet.