2004 PT Cruiser Brake problems

[cbt01]

My cruiser brake pedal started travelling to floor, have had new front and rear pads and discs replaced, and on dealer instruction have just installed a new master cylinder. Calipers retracting properly but pedal still travelling to floor and no brakes. HELLLLLLPPPPPPP!

[bobs turbo pt]

leaking fluid somewhere ?? or a vaccum leak ??

[CREWZIN]

Sounds like the dealer didn't bleed the system properly. Call them up, tell them your problem and have it towed back at their expense.

[turbo_pt2003]

In my few years of working in a shop, I would have to say that they left some air in ur system. (not the correct amount of bleeding of the fluid) air bubbles travel fast in those little lines...take it back like crewzin said and have them take a test drive with u. Have them re-bleed the whole system and u should be in good shape.

[bobs turbo pt]

is the reservoir filled with brake fluid ?? i had the brakes done of my wifes pt about two weeks later my wife says "the brake light is on " so i get in the car and the petal is almost to the floor !! no leaks that i can see anywhere, in the reservoir there wasnt much fluid at all, i added some and about 2 weeks later same problem , i take it back to the guy he calls about 1 hour later says its done, when i asked what was he said the forgot to tighten the brake lines on the front calipers !! i was shocked & pissed !!