Find some parts window washer nozzle, trunk lid?

[PTC06Peet]

I'd like to get some replacement parts, not sure if i should go to a junkyard or buy online
- a nozzle of the front window washer is broken and the part of the plastic that is inserted in the hose is fused/melted to the rubber hose and cant remove easily except piece by piece (am afraid pieces will fall back into the hose), so maybe i also need to get a hose just in case.
- a trunk lid or cover? (to put in/on top of the trunk so that you cant see in the trunk from the rear window.)

[CREWZIN]

Originally Posted by PTC06Peet

- a trunk lid or cover? (to put in/on top of the trunk so that you cant see in the trunk from the rear window.)

It's a bit expensive but why not get yourself a rear shelf? It covers whatever you buy from prying eyes plus has a lot of other uses like a table for tailgate parties and the shelf itself can hold odd and ends. It stores in three different positions also (high, low and towards the back when not needed).

[PTC06Peet]

that's it!
how much am i looking at when buying used at a salvage yard ?
i see they sell used on craigslist/ebay for 80$ !?! with stains !
i might just make one myself if i can find some gray carpet thing

[CREWZIN]

There's 3 on eBay right now ranging from $27 - $71 but still have time for more bids. The dealer wants about $150 for a new one. It will be hard to find in a salvage yard but you can call around for nothing.

Custom shelves will cost even more.

[crusierdad76]

Cruzin is that nos actually hooked up to your PT and if so how much??

[Candyman]

Hey crusierdad76,

Yep, he had to install it to keep up with that Vette of his!

Just kidding!

Nah, that is a really way too cool NOS Tank/ Speaker Sub Box. I can't remember who made them, but they did a pretty good job as I recall on all the detailing of the bottle making it hard to tell from the real thing!


Hey PTC06Peet,

At least as a partial answer, you could check around and see if you might have a reasonable Tint Shop to darken up the windows if you don't have any luck finding a shelf. I had me done in Limousine Black up to the front doors, and then had my front windows (which may be llegal in many states so check first), and sun strip across the windshield done for $130.00 once upon a time, but just for the back doors, rear sides, and back glass, your probably looking at around $80 - $100 for a decent job, and its pretty tough to see much of anything inside, or in the back seat! I would definitively check the wrecking yards, or EBay for a shelf as well, if you need a backup.

Candyman

[crusierdad76]

Thanks Candyman
That is way cool looking I wsa kinda wondering if the PT woulf handle like a 75 shot of go juice it might brighten up the day

I have never really looked but i dont think that shelf would be to hard to build Id be willing to bet some finish grade plywood and some sanding and staining it would look prety cool

[PTC06Peet]

thanks guys,

just came back from the Home Depot,
a big enough piece of plywood or some hard card?-board costs 4-10$,
didnt check if they have gray carpet (~10-20$ ??)
a long plastic pipe is ~3$ if i saw right
+ some sort of glue for the carpet to the plywood (+ ~10$ ?)
+ need to buy a saw for the plywood/cardboard maybe i can cut with cutter.
+ screws or some fastener to bind the pipe to the board (~ 2-5$ ?)