PT Cruiser Forum   Car Videos
Custom Wheels | Free Car Insurance Quote      

Go Back   PT Cruiser Forum > General Forums > General PT Cruiser Discussions

PT Cruiser Forum

I was right...

 
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 20 Jan 2009, 08:15 pm
2007's Avatar
Young Cruiser
 
Join Date: Feb 2008
Location: In the Middle
Posts: 78
Default I was right...

.

First, just a quick question: Does your PT have greasable lower ball joints from the factory?

Now, the story: On December 23, 2008 I became suspicious of the stealership not greasing my lower ball joints during a lube/oil/filter. Yet another reason Chrysler is suffering...

I go in today and politely ask the guy to be sure to grease the lower ball joints. Here's how it went:

Me: Could you be sure to grease the lower ball joints, I think they were forgotten last time.

Him: Your car has a sealed chassis, sir.

Me: That's what I would have guessed too, but the lower ball joints do have fittings on them.

Him: Maybe someone changed them out?

Me: I bought the car new with only 9 miles, so if they were swapped it was done before then, otherwise it's what Chrysler put in there.

Him: We'll see when we lift it up.


Then they lift it up to look for an oil leak that I asked them to look at and change the oil. They found the oil leak and called me out there to see it. While under the car with the mechanic, he comments on how strange it was to have greasable lower ball joints and that he had never seen any on a PT before.

Proper care and maintenance is critical. No wonder so many people have parts wear out prematurely on their cars.

.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #2 (permalink)  
Old 20 Jan 2009, 08:44 pm
quicksilverdon's Avatar
Obsessed Cruiser
 
Join Date: Nov 2003
Location: Phillipsburg, NJ, USA.
Posts: 5,859
Default Re: I was right...

Now I'm going to go look - I didn't think there were fittings. If there are, I'll lube myself!
__________________
'05 Limited Turbo Lite, (Silver, of course)4-wheel ABS, Sunroof, Spoiler. Mods: E&G Classic grill, K&N FIPK, BTG duals, rear lowered 1.5", LED washer lights, $20 catch can, Aoogah horn, Weatherflectors, Sunroof Deflector, Fuzzy Dice, rear logo flames, rear pinstripe graphic, Gen3 Taillights, rear sway bar, hood struts, Strut bar.
Traded in '02 Silver Touring Edition w/87,000 miles
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #3 (permalink)  
Old 21 Jan 2009, 11:45 pm
soonercruiser's Avatar
Senior Cruiser
 
Join Date: Jun 2007
Location: Oklahoma City
Posts: 1,622
Talking Re: I was right...

QSD...."Lube Yourself"???!!
No! I won't go there!
__________________
Frank, aka SOONERCRUISER, and the Black Sheep
(Two Cruisers are better than one!)
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #4 (permalink)  
Old 22 Jan 2009, 09:47 am
Hooligan's Avatar
Veteran Cruiser
 
Join Date: Aug 2003
Location: MERRITT ISLAND, FL, USA.
Posts: 4,280
Default Re: I was right...

...with Wesson Oil, right QSD????
__________________

2008 Silver Steel Metallic, Touring, NA, Sirius; Chromed door handles; lower grille; fog light surrounds; chrome front & rear bumpers strips; Airaid air filter; Bassani duals; Modesty Cover; Autolite AP5263 Platinum Plugs (.040); Crane Plug Wires; NAPA Ceramic pads; Blane hood struts; PTeazer Gas, Brake & Foot Rest Pedals, '05 Rear Step Pad, Stainless Door Sills, Llumar tint, "A" Piller chrome
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #5 (permalink)  
Old 22 Jan 2009, 09:58 am
CREWZIN's Avatar
Obsessed Cruiser
 
Join Date: Sep 2001
Location: West Central Florida, USA.
Posts: 9,683
Default Re: I was right...

Back on subject, my 2001 has NO grease fitting so if yours does, then Chrysler made another change after the first year.
__________________
...just CREWZIN along! ® . . . PT Cruiser Links Moderator
2000 PT. 100,000 miles, Original Owner
Visit My Home Page www.CREWZIN.com
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #6 (permalink)  
Old 22 Jan 2009, 12:27 pm
crusierdad76's Avatar
Fanatic Cruiser
 
Join Date: Aug 2008
Location: St James Missouri
Posts: 647
Default Re: I was right...

well then they must have made another after the 06 cuase there aint noting to lube under mine
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #7 (permalink)  
Old 22 Jan 2009, 01:05 pm
Fresh Cruiser
 
Join Date: Oct 2008
Location: mohave valley
Posts: 49
Default Re: I was right...

my 02 stock ball joints didn't have grease fitting but my aftermarket e-bay control arms do.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #8 (permalink)  
Old 22 Jan 2009, 01:21 pm
crusierdad76's Avatar
Fanatic Cruiser
 
Join Date: Aug 2008
Location: St James Missouri
Posts: 647
Default Re: I was right...

hey on my 200o intrepid there is not greese fitting either but there is now

Last edited by crusierdad76; 22 Jan 2009 at 04:44 pm.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #9 (permalink)  
Old 22 Jan 2009, 01:27 pm
CREWZIN's Avatar
Obsessed Cruiser
 
Join Date: Sep 2001
Location: West Central Florida, USA.
Posts: 9,683
Default Re: I was right...

My Vette has em, but were talking 22 years ago.
__________________
...just CREWZIN along! ® . . . PT Cruiser Links Moderator
2000 PT. 100,000 miles, Original Owner
Visit My Home Page www.CREWZIN.com
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #10 (permalink)  
Old 22 Jan 2009, 03:52 pm
crusierdad76's Avatar
Fanatic Cruiser
 
Join Date: Aug 2008
Location: St James Missouri
Posts: 647
Default Re: I was right...

but then the vette is a classic American made muscle car that was made when cars were well car's
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -5. The time now is 11:15 am.




Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
LinkBacks Enabled by vBSEO 3.3.1 © 2009, Crawlability, Inc.
vB.Sponsors

  Free Myspace Layouts | Adult ADD | Electronics | Debt Consolidation | Barbara Boxer