PT Cruiser Forum  
Advertisements
       

Go Back   PT Cruiser Forum > General Forums > General PT Cruiser Discussions

PT Cruiser Forum

Advertisements
Hood Fitment

 
Like Tree3Likes
  • 3 Post By CREWZIN

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 25 Jan 2013, 07:49 am
fy9-03pt's Avatar
Cool Cruiser
 
Join Date: Apr 2003
Location: Maryland, USA.
Posts: 293
Default Hood Fitment

I would like to know if a Hood from a 2003 GT Cruiser will fit and work on a 2009 PT Cruiser. I know the bottom of the headlights are different. Just wondering if there is any CHANGE in the Hood Styling.
Has anyone did something like this OR Know ? Thanks in Advance
__________________
Robert
Reply With Quote
  #2 (permalink)  
Old 25 Jan 2013, 08:51 am
Ray_Dockrey's Avatar
Senior Cruiser
 
Join Date: May 2012
Location: Mustang, OK
Posts: 1,213
Default Re: Hood Fitment

According to what I have found the hoods are all the same. They never changed.
Reply With Quote
  #3 (permalink)  
Old 25 Jan 2013, 08:57 am
Busted_PT's Avatar
Obsessed Cruiser
 
Join Date: Jan 2012
Location: Beckley, W.V.
Posts: 13,901
Default Re: Hood Fitment

The only difference I have seen is some have a larger bird. Don't know if line up holes are different. Other than that there's no difference.
__________________

03 Dream stock___________________________ 04 Touring turbo lite stock_________ 02 Touring stock_____________________ The "Three Amigos"
__________________________________________________ __________________________________________________ ___________Performance, Body and Service, OEM

This Is my project page.
http://www.ptcruiserlinks.com/forum/...oject-1-a.html

This is a great read from one of our own! Badglas
badglas.blogspot.com
Reply With Quote
  #4 (permalink)  
Old 25 Jan 2013, 09:00 am
Obsessed Cruiser
 
Join Date: Sep 2001
Posts: 27,750
Default Re: Hood Fitment

Quote:
Originally Posted by Busted_PT View Post
The only difference I have seen is some have a larger bird. Don't know if line up holes are different. Other than that there's no difference.

Large Bird on Hood.

__________________
Rules of the forum have been updated as of *07/07/2019* Please read them over.

- All decisions by the Moderator are semi-permanent, can and may be changed at his discretion but definitely will be the final word. Any action performed by the Administrator or Moderators are not to be discussed on the forum.
Reply With Quote
  #5 (permalink)  
Old 25 Jan 2013, 10:00 am
Busted_PT's Avatar
Obsessed Cruiser
 
Join Date: Jan 2012
Location: Beckley, W.V.
Posts: 13,901
Default Re: Hood Fitment

I wonder what the wings reference to on Chrysler? Cool TA, 76 and 78 were my favorites.
__________________

03 Dream stock___________________________ 04 Touring turbo lite stock_________ 02 Touring stock_____________________ The "Three Amigos"
__________________________________________________ __________________________________________________ ___________Performance, Body and Service, OEM

This Is my project page.
http://www.ptcruiserlinks.com/forum/...oject-1-a.html

This is a great read from one of our own! Badglas
badglas.blogspot.com
Reply With Quote
  #6 (permalink)  
Old 25 Jan 2013, 10:05 am
Obsessed Cruiser
 
Join Date: Sep 2001
Posts: 27,750
Default Re: Hood Fitment

During the “rebirth” of Chrysler in the late 1990s, the Chrysler “seal” logo was revived, first as a circle, then installed in wings.



Shortly after the Fiat takeover, Chrysler trademarked another new logo, based on a modernized wing design:




Full History: http://www.allpar.com/history/logos.html
__________________
Rules of the forum have been updated as of *07/07/2019* Please read them over.

- All decisions by the Moderator are semi-permanent, can and may be changed at his discretion but definitely will be the final word. Any action performed by the Administrator or Moderators are not to be discussed on the forum.
Reply With Quote
  #7 (permalink)  
Old 25 Jan 2013, 11:11 am
Senior Cruiser
 
Join Date: May 2012
Posts: 1,354
Default Re: Hood Fitment

Quote:
Originally Posted by CREWZIN View Post
During the “rebirth” of Chrysler in the late 1990s, the Chrysler “seal” logo was revived, first as a circle, then installed in wings.



Shortly after the Fiat takeover, Chrysler trademarked another new logo, based on a modernized wing design:




Full History: a history of Chrysler, Dodge, and Plymouth logos

Are you trying to tell me that fiat......the italian junk car company owns and makes Chrysler?

hmmmmm this could explain a LOT about our cars :-p
Reply With Quote
  #8 (permalink)  
Old 25 Jan 2013, 11:59 am
Busted_PT's Avatar
Obsessed Cruiser
 
Join Date: Jan 2012
Location: Beckley, W.V.
Posts: 13,901
Default Re: Hood Fitment

They didn't own it then. Not a well thought of car the first time around. The spider was pretty but finders went together in peaces and joints were leaded. Like custom built. Metal was soft. You could easily drive a pecking hammer through the finder if you hit it to hard. It was a whole lot like working on an aluminum bodied car. Spiders would run but you could jump time if you were to aggressive on the shift.
__________________

03 Dream stock___________________________ 04 Touring turbo lite stock_________ 02 Touring stock_____________________ The "Three Amigos"
__________________________________________________ __________________________________________________ ___________Performance, Body and Service, OEM

This Is my project page.
http://www.ptcruiserlinks.com/forum/...oject-1-a.html

This is a great read from one of our own! Badglas
badglas.blogspot.com
Reply With Quote
  #9 (permalink)  
Old 25 Jan 2013, 12:44 pm
fy9-03pt's Avatar
Cool Cruiser
 
Join Date: Apr 2003
Location: Maryland, USA.
Posts: 293
Default Re: Hood Fitment

Quote:
Originally Posted by Busted_PT View Post
They didn't own it then. Not a well thought of car the first time around. The spider was pretty but finders went together in peaces and joints were leaded. Like custom built. Metal was soft. You could easily drive a pecking hammer through the finder if you hit it to hard. It was a whole lot like working on an aluminum bodied car. Spiders would run but you could jump time if you were to aggressive on the shift.
what does this have to do with Hood Fitment ( Can't put fEnders on top of the Motor.)
__________________
Robert
Reply With Quote
  #10 (permalink)  
Old 25 Jan 2013, 01:17 pm
Busted_PT's Avatar
Obsessed Cruiser
 
Join Date: Jan 2012
Location: Beckley, W.V.
Posts: 13,901
Default Re: Hood Fitment

Quote:
Originally Posted by fy9-03pt View Post
what does this have to do with Hood Fitment ( Can't put fEnders on top of the Motor.)
Fiats and Plums response to there ownership. We had pretty much covered the hood for ya. It fits.
__________________

03 Dream stock___________________________ 04 Touring turbo lite stock_________ 02 Touring stock_____________________ The "Three Amigos"
__________________________________________________ __________________________________________________ ___________Performance, Body and Service, OEM

This Is my project page.
http://www.ptcruiserlinks.com/forum/...oject-1-a.html

This is a great read from one of our own! Badglas
badglas.blogspot.com
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
seat fitment. ROCKINRONNIE Exterior & Interior Styling 4 31 Jan 2013 02:46 pm
exhaust fitment ipath1 General PT Cruiser Discussions 3 05 Jun 2012 04:59 pm
Dash board fitment Funkypt Interior Accessories Forum 4 28 Apr 2011 08:01 pm
Exterior Mirror Fitment 07PTSilver General PT Cruiser Discussions 6 03 Nov 2008 07:08 pm
Fender fitment - '07 on an '03? jkt General PT Cruiser Discussions 7 22 Aug 2008 03:20 am


All times are GMT -5. The time now is 10:34 am.




Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
LinkBacks Enabled by vBSEO 3.6.0 PL2 © 2011, Crawlability, Inc.
vB.Sponsors