PT Cruiser Forum  
Advertisements
       

Go Back   PT Cruiser Forum > 2.4L Turbo Forums > General Turbo Discussions

PT Cruiser Forum

Advertisements
GUAGE PODS

 
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 04 Nov 2003, 12:46 pm
Cool Cruiser
 
Join Date: Jul 2003
Location: DFW, TX, USA.
Posts: 222
Default GUAGE PODS

OK, LETS HEAR IT, WHERE DID YOU GET YOURS. I WOULD LIKE A SINGLE. BUT GIVE IT TO ME.
Reply With Quote
  #2 (permalink)  
Old 04 Nov 2003, 04:00 pm
Fanatic Cruiser
 
Join Date: Apr 2003
Location: San Diego, Ca, USA.
Posts: 630
Send a message via AIM to macster
Default

Quote:
quote:Originally posted by RODRUN

OK, LETS HEAR IT, WHERE DID YOU GET YOURS. I WOULD LIKE A SINGLE. BUT GIVE IT TO ME.

Summit Racing (triple pod)

macster
__________________
Don\'t help me
Help the bear

Patriot Blue PTGT, Stage1, K&N Typhoon, 2.5\" Cat back exhaust, Sun Hyperground, Sun HOT INZAMA Hyper Voltage system, Adams Uppipe
Reply With Quote
  #3 (permalink)  
Old 04 Nov 2003, 06:16 pm
Cool Cruiser
 
Join Date: Jun 2003
Location: W. Covina, CA, USA.
Posts: 345
Default

race and street, triple pod in grey. it's actually painted grey but it's a very good match to the GT's interior. I think you can get it in a double also.
__________________
R_K_GT

\'03 Electric Blue GT, silencers removed, K&N intake, Blanes Hood Struts, Emblems removed from rear hatch, Stage 1, Mopar BOV, Eibach springs, 18x8 Mille Miglia EV-R on 225/40/18 BFG g-Force T/A KDW 2, Eibach sway kit F&R, BTG Strut Bar, Chrome fuel door, custom 3\" cat-back exhaust with Magnaflow High-flow muffler, Blitz Dual Turbo Timer, Autometer Triple gauge pod, Autometer Ultra-lite with boost/vac, oil press and water temp gauges, Turbochargers.com wastegate, turboxs DSBC, Adams UCP, Dynoworks motor mounts with more to come.....
Reply With Quote
  #4 (permalink)  
Old 04 Nov 2003, 06:19 pm
Fanatic Cruiser
 
Join Date: Aug 2003
Location: Longview, WA, USA.
Posts: 569
Default

I'm also looking for a clean way to mount just one guage. I'd like to have a boost guage. I don't see a need for much more than that. Are you with me?
__________________

2003 Electric Blue GT. Mods - BTG lowering springs, Polished Blane hood struts and hatch strut covers, chrome door handle scratch guards, molded rear splash guards, BTG polished strut tower brace, BTG axle back exhaust, K&N drop in air filter with baffles removed, Royal Purple synthetic motor oil and K&N filter, Polished front and rear sill plates, Chrome \"PT CRUISER\" rear license plate frame, chrome door spear covers, Chrome antenna bezel, Get the BEST detail products from Gary here: http://www.perfectautofinish.com/
See my PT and mods here:
http://www.imagestation.com/album/?id=4289059783

MY EMAIL ADDRESS: stephenlarson@adelphia.net
Reply With Quote
  #5 (permalink)  
Old 04 Nov 2003, 06:25 pm
Cool Cruiser
 
Join Date: Jul 2003
Location: DFW, TX, USA.
Posts: 222
Default

I am just about moded as far as I want to go, and I dont want the pod in the way of driving. A single for me is the ticket. Found one but it is a fit all. Still looking. My boost guage from Mopar should be here tomorrow. I have been told it has two pages of install instructions. This should be fun.
__________________
03 Steel Blue Pearl Turbo, Stage 1, Mopar BOV, Magnaflow performance muffler, My Air Box mod., AMXpipe W/K&N filter, LED lighting,PT Tunning rear lowering springs & BGT Strut tower brace, Hankooks Ventus tires, Rage Motif 17 in. wheels. Tribal pinstrips by Palmer (who else), Color match paint by Etouchup.com, Plugs and wires by Sparkplugs.com, http://members.cardomain.com/rodrungtpt
Reply With Quote
  #6 (permalink)  
Old 04 Nov 2003, 08:04 pm
Fanatic Cruiser
 
Join Date: May 2003
Location: Rhode Island.
Posts: 950
Default

dual gauge pod...it's really not in the way at all.
I painted mine with grey primer and then one coat of clear coat. This matches the light grey A-pillar better.
Got one from a friend of the family who does aftermarket and can get Auto Meter stuff cheaper
__________________

2003 GT Inferno Red,5-spd,Eibach Springs,Koni Sport Adjustables, Eibach front and rear Sway Bars, Mopar Stage 1,Mopar BOV,Custom 2.5\" Dual Tip Exhaust (Magnaflow),Hurst Short Throw Shifter, Pioneer DEH6500 Headunit, RF Punch 300 and 301 Amps,RF 12\" Sub and MB Quart Reference and Premium Speakers,Ronal RT 17x7.5\'s with Michelin Pilot Sport 225/45ZR17s, Koni Adjustible shocks, Keystone single scoop, GT Airraid Intake, Mopar Ground Effects
Homepage:
http://www.cardomain.com/id/ptgtredman

http://blueman.ptenthusiasts.net/index.html
Reply With Quote
  #7 (permalink)  
Old 04 Nov 2003, 09:28 pm
Cool Cruiser
 
Join Date: Jun 2003
Location: W. Covina, CA, USA.
Posts: 345
Default

Quote:
quote:Originally posted by PTGT Redman


Got one from a friend of the family who does aftermarket and can get Auto Meter stuff cheaper
Oh, now you tell us!!!
__________________
R_K_GT

\'03 Electric Blue GT, silencers removed, K&N intake, Blanes Hood Struts, Emblems removed from rear hatch, Stage 1, Mopar BOV, Eibach springs, 18x8 Mille Miglia EV-R on 225/40/18 BFG g-Force T/A KDW 2, Eibach sway kit F&R, BTG Strut Bar, Chrome fuel door, custom 3\" cat-back exhaust with Magnaflow High-flow muffler, Blitz Dual Turbo Timer, Autometer Triple gauge pod, Autometer Ultra-lite with boost/vac, oil press and water temp gauges, Turbochargers.com wastegate, turboxs DSBC, Adams UCP, Dynoworks motor mounts with more to come.....
Reply With Quote
  #8 (permalink)  
Old 04 Nov 2003, 11:27 pm
Senior Cruiser
 
Join Date: Aug 2003
Location: Barrie, Canada.
Posts: 1,171
Default

Quote:
quote:Originally posted by RODRUN

I am just about moded as far as I want to go, and I dont want the pod in the way of driving. A single for me is the ticket. Found one but it is a fit all. Still looking. My boost guage from Mopar should be here tomorrow. I have been told it has two pages of install instructions. This should be fun.
its actually pretty simple install, if I can do it, anyone can.
Reply With Quote
  #9 (permalink)  
Old 05 Nov 2003, 02:39 pm
Young Cruiser
 
Join Date: Mar 2003
Location: Charlotte, NC, USA.
Posts: 99
Default

I mounted a 2 gauge on the A pillar, got it from Race & Street and painted to match the interior. Also mounted 2 gauges on the Steering column cover. Can see at http://home.bellsouth.net/p/s/commun...iew=thumbs&ck=
__________________
Don
2003 PT GT
Reply With Quote
  #10 (permalink)  
Old 05 Nov 2003, 05:07 pm
Young Cruiser
 
Join Date: Apr 2003
Location: Seattle, WA.
Posts: 54
Default

Don, nice guage setup[?]
What did you use for the mounts to the steering column? Any details that I could copy would be appreciated.
__________________

\'03 Black Turbo.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
A-Pillar Pods bigtommy83 Classifieds: For Sale/Trade 0 02 Sep 2004 11:16 pm
Installing a Turbo guage crazie.eddie General Turbo Discussions 1 30 Aug 2004 11:17 am
buzzing boost guage pt pete General Turbo Discussions 3 27 May 2004 12:20 am
guage wiring help needed Punch Interior Accessories Forum 3 27 Sep 2003 05:19 pm
guage wiring (again sorry) Punch Exterior & Interior Styling 2 26 Sep 2003 11:35 pm


All times are GMT -5. The time now is 04:06 pm.




Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
LinkBacks Enabled by vBSEO 3.6.0 PL2 © 2011, Crawlability, Inc.
vB.Sponsors