Turbo inlet size

[Timmy C]

I was wondering if anyone knew what the size of the
turbo inlet was? I am going to make my own intake
and need to know this but don't want to go take it
off because the car is still hot. Any help would
be appreciated.

[OurPTGT]

ask AMX1397, he'll know

[Mean Green]

The turbo inlet is 2 1/2"

[tallypt]

The inlet o.d. is almost the exact size of the o.d. diam. of standard pvc or abs pipe. I used a standard plumbing 2" rubber flex connector which can be purchased at Lowes for $2 to connect my home built CAI to the turbo w/ zero problems.

[Mean Green]

If you want the real deal then go here for the 90 degree elbow that is 2 1/2" on one end and 3" on the other. It is high temp rubber.
http://www.atpturbo.com/Merchant2/me...o de=SIL-90EL

It's on the bottom left of the page under 90 degree transition elbow. It's what I used for my turbo up pipe.

[Timmy C]

Thanks mean green that is exactly what I was
looking at, but just wanted to make sure
that was the proper size.