Dash Kit

[sakigt]

Alright. Heres a pic of what Im talking about. Note the shineyness (which doesnt match the flatness of the GT shifter area or my headunit)and the, IMO necessary excessive gaps in this area. I contacted the manufacturer and they gave me an address to send the kit to. I forgot that there would be an extra cost to me as well...Ill let you know how it goes.

[IRPT]

Hey sakigt, is it getting cold in Florida, noticed your heat was turned up to max.

[sakigt]

quote:Originally posted by IRPT

Hey sakigt, is it getting cold in Florida, noticed your heat was turned up to max.

Hehe we have our nights...But cold to me is 60 (I have little body fat [B)])
I normally just let the heat from the engine come in.

Actually right now its 85 so its the other way around! Woot! [8)]

[sakigt]

Examples of "Woot"

[JaxPT]

yehhhhhh this winters been shibby in Florida. 80 degrees this week in North fla. [?]. Saki, 60? brrrrrrrrrrrrrrrrr girl das too cold

[PianT]

Oh please......

Current temp 23F.....

[yobiebs]

hey SakiGT, any chance of you posting some pics of your interior neons? p-p-p-lease?

[2sb]

sakigt, all of this is just double IMHO because these things are mostly personal preference.

I liked the Bene-Vento kit best for the shift console and went to Woodview for door handle surrounds and a molded center pod. Fortunately the colors matched. DIMHO it looks better when multiple pieces are not "touching" each other which gives the impression of a bunch of little pieces just stuck on...i.e. look at how your console pic would seem without the coin changer cover.
Mine's woodgrain so I can get away with more. Since aluminum's brighter, less will be as much. If it looks like too little, you can always add more.
When picking which colors, we were able to call and they sent us samples for a refundable deposit. This saved restocking costs. You might also check into some "brushed stainless" since naming seems to be vague to some of them.

Here's the URL? to my album which has more interior pics if they help.
www.imagestation.com/album/?id=4290846501

[sakigt]

quote:Originally posted by yobiebs

hey SakiGT, any chance of you posting some pics of your interior neons? p-p-p-lease?

My bad, was going to a while back wasnt I? Ok, my interior is dirty but when it gets darker Ill take some tonight, I promise

[sakigt]

quote:Originally posted by 2sb

sakigt, all of this is just double IMHO because these things are mostly personal preference.

I liked the Bene-Vento kit best for the shift console and went to Woodview for door handle surrounds and a molded center pod. Fortunately the colors matched. DIMHO it looks better when multiple pieces are not "touching" each other which gives the impression of a bunch of little pieces just stuck on...i.e. look at how your console pic would seem without the coin changer cover.
Mine's woodgrain so I can get away with more. Since aluminum's brighter, less will be as much. If it looks like too little, you can always add more.
When picking which colors, we were able to call and they sent us samples for a refundable deposit. This saved restocking costs. You might also check into some "brushed stainless" since naming seems to be vague to some of them.

Here's the URL? to my album which has more interior pics if they help.
www.imagestation.com/album/?id=4290846501

I agree entirely. When I took off some of the pieces in that area it started to look better, but I just couldnt stand the shineyness... Thanks for the link!

My next interior purchase will be after viewing it in person. Hopefully Ill be able to do that next May at Cruise to Daytona...so anyone there shouldnt be surpised if I question them to high hell about their interior kit