How do I remove?

[PTRON]

[:I]The rear door exhausters? Do they just pull out?[:I] I wanna paint them body color.[8D]

[gonzomania]

PTRON,
Not sure what you mean? [:I]

[CREWZIN]

Ron,

There's no screws or anything showing so I would just pry gently around the top or bottom...it probably just snaps/pops in like most of the inside moldings.

Gonzo, PTRON's talking about the black grill-like things inside the rear door jams..think they are for ventilation.

[gonzomania]

Checked my cd and Books can't find any thing on it. Crewzin is probably correct. If you get them out and painted let us see them and how they look.

[R.E.]

PTRON, they will pop out. The clips are on the top and bottom, none on the sides. Pry them off, carefully from the bottom side, not the top. Use a flat blade, like a small putty knife. slide it under the edge and push. The clip has a "little" flex to it. You may have to pry it a little while pushing on it. After that has been released you can just raise it up and the top will just slide down and off. They go back on easy, just reverse the procedure. Insert the top clips and just snap the bottom one back in. Bob

[Gary04GT]

quote:Originally posted by gonzomania

...let us see them and how they look.

They will look something like this. [8D]

[gonzomania]

PT RON,
Pulled mine out today and painted them. I used a small screw driver from the bottom and lifted up. Becareful there are 2 small tits on the top.