Interior parts for my 2006 GT

[Robi]

Hi guys

I have some trouble finding a couple of genuine parts for my 2006 GT. Maybe someone can help?

1)
Cover without handle grab (on passenger side of 2006). There seems to be a version without that handle for right-hand-drive PTs. Does anyone know the part-nr? The normal one with handle is 05303581AB.

2)
Driver seat cushion cover for *CL: Leather Trimmed Bucket Seats; -DA: Pastel Slate Gray.
I've only found 1CY541D5AA, 1CY541KAAA, which seem to have the beige colour. Possible that there is no Pastel Slate Grey anymore?

3) Grey GT floor mats for the 2006

Pictures of the seats and floor mats are attached.

Thanks

[soonercruiser]

The "GT" logo mats were only OEM.
So, You are going to gave a hard time finding a new set.
You will have to keep watching the various PT Fakebook pages to see if some come up for sale used.
I'll try to keep you in mind if I see some used.

Otherwise here are a few options...

https://www.quirkparts.com/oem-parts...hoCqYIQAvD_BwE

https://www.socalmopardirect.com/oem...RoC7FIQAvD_BwE

https://www.ebay.com/itm/CHRYSLER-PT...YAAOSw2stbms6X

[Handy_Cruiser]

I think Robi is in Zürich, Switzerland. I don't think buying used stuff from folks in the states is going to workout due to shipping costs. He likely needs something already in the EU.

[Robi]

Thanks to both of you. I buy most stuff from online stores in the US (much cheaper than buying from local dealers here). It works pretty well. Except that I am not very talented in finding the right part numbers :-)

[Robi]

The floor mats in the third link are the ones I've already imported. They are darker then the GT ones but in case I cannot find the GT version I will use these.

[Handy_Cruiser]

Here's a post from 2006 about removing the towel bar. I've never seen a 2nd Gen PT without the towel bar from the factory. But this member came up with a solution.

Originally Posted by rte662006

I didn't have to touch the air bag cover. There are 2 small covers on the outside of the handle. Pry them off with a small screw driver.Once you remove those covers there are 2 long screws that hold the handle on. Remove those screws. Once those screws are out you can remove the handle. After removing the handle unclip the dash piece. When you have the grey dash piece off you will notice that there is a white plastic piece that the 2 long screws go through. Take a Dremel tool with a cut off wheel and cut the 2 stumps off that support the handle. On the grey piece do the same. Take the Dremel and cut the stumps off and grind them completely flat. I then took the piece to a fabric store and found a grey vinyl with grain that matched the interior closely.Its a shade off but if you look at the handle it doesn't match either. I took the dash piece and put 2 strips of duct tape to cover the holes. I then used a piece of poster board cut to the same size as the piece and duct taped that on so there is no chance of seeing the holes after it is covered.

Then take the vinyl and wrap the piece. I used Velcro and model glue to hold the vinyl on.Sounds half-assed but it worked.When you are finished just clip the piece back in.Once its back on you don't see any of the Velcro or duct tape and you have 1 trick dash piece and you never have to look at that stupid handle again.I f any one wants to do this i will do my best to help out.wb605@msn.com

I even have some extra vinyl that i will gladly share. If you don't feel confident about doing the vinyl just do all the grinding and bring it to an upholstery shop to have it covered. Its really not hard just time consuming. I hope that this makes since [:I]

[_PTGT03]

Originally Posted by Robi

The floor mats in the third link are the ones I've already imported. They are darker then the GT ones but in case I cannot find the GT version I will use these.

I have my original GT floor mats, a full set. In like-new condition. Interested ?

[Handy_Cruiser]

Originally Posted by _PTGT03

I have my original GT floor mats, a full set. In like-new condition. Interested ?

If they are from a 2003 GT, they are likely either dark gray (almost black) or taupe. In a 2006 and newer GT, they will be more of a medium dark gray and don't look black.

PS: I probably should have used the word "grey" rather than "gray" since we are talking about a European GT here.

[Robi]

Originally Posted by _PTGT03

I have my original GT floor mats, a full set. In like-new condition. Interested ?

Are those the floor mats of 2006 and up? As Handy_Cruiser mentioned the older ones are much darker.
If, yes I'm surely interested.

[Robi]

Originally Posted by Handy_Cruiser

If they are from a 2003 GT, they are likely either dark gray (almost black) or taupe. In a 2006 and newer GT, they will be more of a medium dark gray and don't look black.

PS: I probably should have used the word "grey" rather than "gray" since we are talking about a European GT here.

Hahaha since it's a Swiss PT you might as well say it in Swiss German "grau".

Thanks for the description. Might be a Christmas project. The part I was referring to on right-hand-drive PTs I've attached.