This is pretty cool

[gonzomania]

Was looking for parts for my sons Corsica and typed in Chevrolet OEM parts. This site came up:http://www.courtesysandiego.com/parts.htm I've been looking for a TV & dvd player for the PT. If you go to this site below the Corvette this picture of a kid watching this small TV. It looks like it would fit between the front armrest in the console area. What do you'll think? Can't afford the screens in the headrest!!! I put a period at the end of the link and it highlighted it,Thanks I corrected the problem

[bigdogdad]

The links not working[:I] Alot of this lately.[:I]

[Dragula]

Try this: http://www.courtesysandiego.com/parts.htm

[Hooligan]

That link worked. I can't see a video player in a car UNLESS you have small ones (children) onboard.

[CHROMEDCRUISER]

Give Ebay a try if you're looking for a DVD player/monitor for your PT.

[KingKole02]

Or you could just buy a 04 Tahoe with custom install TVs in ceiling for each rear passenger custom installed at factory, Its a chevy.

Yeah right []

Find that one kid on your block that jacks cars, Im sure he'll find you stuff. [B)]

However ebay could be your best bet.

[Ed Lim]

Dragula, you must tell me where you got hold of that rear door latch handle[}]

[Kammler68]

quote:Originally posted by Ed Lim

Dragula, you must tell me where you got hold of that rear door latch handle[}]

in the turbo forum. Interior and exterior accessories. Look for "Light up skull on liftgate". Extremely sweet idea. I simply must steal it.

How 'bout a step by step walkthrough of the procedure, Dragula?

[Dragula]

I just noticed the off topic post. It is a Bully hitch receiver cover. I used to have it on my hidden hitch, but I'm now too low for that and I couldn't part with it.

I just drilled Holes in the stock handle. I used longer screws than supplied (#10x32). I don't know the exact length. The screws go in from behind the handle. I used a right angle phillips head screwdriver, and a lot of patience. I also used blue locktight on the threads to keep them in place. If you could care less about the eyes lighting up you can stop here...

To get the wires into the liftgate I drilled a hole through the plastic base of the handle. I passed the wires in using wire loom because they are going to get tugged when the handle is in use. I had to lengthen the wires to get them where I wanted them to go. I routed them through the stock harness to the 3rd brakelight, and the running light wires in the drivers side quarter panel.

It sounds like a lot of work, but it really wasn't that hard. All to have people point and laugh at every stop light. I love it.