Advertisements

		PT Cruiser Forum > Members List
pt06's Profile

Mark Forums Read

PT Cruiser Forum

Advertisements

pt06's Profile

pt06

Senior Cruiser

Last Activity: 06 Aug 2019 03:27 am

Statistics

Total Posts

Total Posts: 1,266
Posts Per Day: 0.42
Find all posts by pt06
Find all threads started by pt06

General Information

Last Activity: 06 Aug 2019 03:27 am
Join Date: 26 Jan 2013
Referrals: 0

Likes Given

81 Likes

pt06 liked post by Grasshopper77 On thread : Torque values using an extension

In the aviation world, no calculations are required for extensions. Regardless of how many you use, as long as they are in line. There however is min/max range (10% if I remember right) For example a...
Liked On: 04 Aug 2019, 01:15 am
Posted On: 29 Jul 2019, 09:19 pm
pt06 liked post by Handy_Cruiser On thread : Torque values using an extension

Based on the conservation of energy, using a socket extension on a click-style torque wrench should not matter. Here's why. No matter how much the socket extension twists, the head on the torque...
Liked On: 04 Aug 2019, 01:14 am
Posted On: 29 Jul 2019, 03:08 pm
pt06 liked post by rob302 On thread : Still trying to fix steering vibration

well if the new joint has that much play on the shaft, it either means the shaft was damaged from the old axle or the new axle fits too loosely because it was machined wrong. that shouldn't move half...
Liked On: 24 Jun 2019, 12:43 am
Posted On: 23 Jun 2019, 04:05 pm
pt06 liked post by Handy_Cruiser On thread : What is this part?

Here's a photo of the entire axle seal. It usually includes a thin metal ring, rubber seal and spring. It's all together one piece but sometimes comes out in pieces. Do you need anything beyond...
Liked On: 20 May 2019, 04:19 am
Posted On: 19 May 2019, 07:11 pm
pt06 liked post by shelbyzman On thread : Should motor move while idling?

I measured and it is about 4mm off. Is this video good to go by? https://www.youtube.com/watch?v=a0jKK5B_hoE
Liked On: 04 May 2019, 02:41 am
Posted On: 03 May 2019, 12:12 pm
pt06 liked post by ptcruisersteve On thread : Should motor move while idling?

After you replaced the upper torque motor mount did you do the 4.720 alignment procedure?
Liked On: 03 May 2019, 04:00 am
Posted On: 02 May 2019, 07:30 pm
pt06 liked post by chris15 On thread : Engine has rod knock

FWIW, the oil pressure indicator lights on these cars are a joke. By the time they legitimately indicate an oil pressure problem, you've likely already done irreparable damage to your bearings....
Liked On: 11 Apr 2019, 04:29 am
Posted On: 05 Apr 2019, 03:04 pm
pt06 liked post by chris15 On thread : What's Causing Misfire and CEL?

Coilpacks are tricky to diagnose, however, in almost every case I've encountered with a coil pack, you'll encounter timing drift on at least a pair of cylinders, if not all of them. The PCM will...
Liked On: 11 Apr 2019, 04:10 am
Posted On: 05 Apr 2019, 03:11 pm
pt06 liked post by Handy_Cruiser On thread : '07 TE will not idle past 3500-4K RPM...

There's likely nothing wrong with your car. The PT engines have a 4000 RPM rev. limiter when in park or neutral. Here's it is on my GT engine: ...
Liked On: 11 Apr 2019, 04:06 am
Posted On: 06 Apr 2019, 04:48 pm
pt06 liked post by rckstein On thread : Liftgate touchpad replacement

The touchpad switch itself is not replaceable, you would have to replace the entire outer winged emblem assy. If you did the modification, which works like a charm, then if the switch ever fails,...
Liked On: 26 Mar 2019, 02:46 pm
Posted On: 26 Mar 2019, 01:36 pm
pt06 liked post by My02RedRide On thread : Transmission case cracks

Looks like casting shrink to me..... normally found around bosses. Happens during the molten alum inject and cooling at different rate as other areas of the mold.
Liked On: 23 Mar 2019, 11:59 pm
Posted On: 23 Mar 2019, 03:44 pm
pt06 liked post by rsrocket1 On thread : rough idle

markeele, I may be off base here but you'd obviously see this when changing the spark plugs. Before doing that, pull the #1 spark plug connector off and inspect the spark plug tube. Sometimes they...
Liked On: 06 Mar 2019, 06:39 am
Posted On: 04 Mar 2019, 07:49 pm
pt06 liked post by pdbrains On thread : rough idle

The p0301 code is caused by cylinder number 1 misfire.so it would be a good idea to remove the spark plug and take a look at it and check that the gap is right and the plug is not cracked or damaged....
Liked On: 06 Mar 2019, 06:39 am
Posted On: 04 Mar 2019, 04:02 pm
pt06 liked post by JoeX On thread : rough idle

As you change the spark plugs I would also do a compression check while you have the upper manifold already removed.
Liked On: 03 Mar 2019, 03:58 pm
Posted On: 03 Mar 2019, 04:37 am
pt06 liked post by ptcruisersteve On thread : Changed motors now it won't start

As Joe posted, check and see if the camshaft sensor connector and the ignition coil connector got swapped. It happened to some other members.
Liked On: 20 Feb 2019, 05:58 am
Posted On: 20 Feb 2019, 01:56 am

Page 1 of 6

1

Mini Statistics

Join Date: 26 Jan 2013
Total Posts: 1,266
Likes Received: 330
Likes Given: 101

Show All Statistics

Recent Visitors

The last 10 visitor(s) to this page were:

This page has had 7,569 visits

All times are GMT -5. The time now is 02:00 pm.

Partners:
Car Videos | Honda Car Forum

Archive: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47