Hey man, if you want to block someone, it's really easy. Just look at the top left corner and click on your usercp. That will take you to the control panel. It's on the left hand side of the page. Look under the settings and options header and the last topic there is edit Ignore list. Click on it and enter members name and you can just click on ignore and you won't see anymore of his posts.

Geez? I know you like to be contrarian and show your knowledge, but you are dead wrong. Actually every single one, including the '82, had the pump in the tank. Not sure why you'd think...

The fuel pump relay on the 2006 Pt Cruiser with a TIPM is inside the TIPM.

Guess my Dad should have been preparing for a tow since 2003. I will repeat that if you can't hear the pump prime, it isn't priming. This has been true in damn near every efi car we have had from a...

I don't have a cheap made in China pump. I have the factory pump on my turbo. Yes it is old and has gone many miles, but it always made a fairly loud buzz when you turned the key to on (stopping...

Recommend removing and thoroughly inspecting all mating surfaces several times. Making sure the hub and center ring are perfectly clean and have no burrs, doing exactly the same thing for the...

WTF does BEING married have to do with anything? lol[/QUOTE] No nubile Latino virgins for you:bluelove:

Well, I think I finally got the airbag problem fixed. I was pretty sure it was the connector. So I took the connector apart last night and tweaked the contacts to ensure connection. NOPE, cleared...

Thanks Chuzz, things are good! Thankfully the weather got too cold and wet for the fires and everything is under control. It was devastating for so many people though. I hope everyone here is safe...

Sorry :o my response was quick on the draw...you should know me anyway... I generally offend no one intentionally but when I do I let them know up front. :D BTW welcome back to the forum :friends:

Sinbad: I found in another thread titled "Depressurize Fuel System on 2006 PT Cruiser" that Chrysler eliminated that Schrader valve on the 2006 models, so bummer, I'd like to have established that I...

I'd take a spray bottle and put gas in it. Remove the throttle body hose and have someone crank the engine while spraying gas in it. If it keeps running while you spray gas and dies when you stop,...

Hehe, yeah 10" of travel space is overkill. Probably gonna go forward with it though due to heavy mods required to lower it maybe 2". ;) I did stick the rear bumper on. The frame needs to come...

Here are a few more "First Look" pictures. It sits up higher than I had desired. I wasn't going for a monster truck look. It's sitting on the skates so removing those will drop it down another 4"...

Hey Sinbad, I got busy with a saws-all and did my first cuts. The wings that support the front fenders are pretty stout since they have an inner and outer layer and are welded alongside the...

There seems to be little to no flex... When I was jacking it up to put it on the cinder blocks for the initial deconstruction, jacking towards the front would also raise the rear. Another good...