PT Cruiser Forum  
       

Go Back   PT Cruiser Forum > Handy_Cruiser

PT Cruiser Forum

Conversation Between Handy_Cruiser and PtinIllinois

 
Conversation Between Handy_Cruiser and PtinIllinois
Showing Visitor Messages 1 to 2 of 2
  1. Handy_Cruiser
    04 Feb 2016 10:26 pm - permalink
    Handy_Cruiser
    I didn't have any problem. If I remember right, I just put a socket, extension and swivel-head ratchet on them. You may need a bungee cord to hold the alternator out of the way.
  2. PtinIllinois
    04 Feb 2016 07:51 pm - permalink
    PtinIllinois
    Hi Handy, hope all is well. I have been changing the alternator in my 2003 LE without the 2.4 non turbo while following your method. So far so good, alternator is loose and unwired and off the mounts but I cannot get the lower bracket out so I can drop the motor and maneuver the alternator out. There are 3 bolts to get the bracket off. What's the trick to access the 2 bolts at their top of the bracket? Appreciate your help, thanks!

All times are GMT -5. The time now is 06:02 pm.




Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
LinkBacks Enabled by vBSEO 3.6.0 PL2 © 2011, Crawlability, Inc.
vB.Sponsors