power locks

[ptlvr]

Have a Question And couldnt find an answer in the search funtion.
I own a 2005 base model and want to install power door locks using factory chrysler parts.I already got actuators and switches from a junkyard and was wondering,if the wiring was preasent in the door panels,would they be direct installs or do I need to get a rkem(I am not planning on remote access at this time,maybe in the future)the parts are from a 2004 Sebring, or will I have to go with aftermarket parts?

[partyd]

there are no cables in the door, no cables behind the fuse box,no relays, you need 3 and no keyless entry module some vehicles have the harness plug for the switches most don't have any of the 2 plugs

that is why we use after market locks system for about $100.00

good luck with the installation

[Cartman]

Im gonna have to go with partyd. if your car didnt come fromt he factory with power locks, an aftermarket system is easier and cheaper. if you are good with wiring, you might be able to use some factory lock switches to give the illusion that you have factory locks.

[bobs turbo pt]

i also agree with the two guys above me , and you might have someone do it for you also this way any problems you have someone to fall back on good luck and keep us posted