PT Cruiser Forum  
Advertisements
       

Go Back   PT Cruiser Forum > General Forums > Sound and Security Forum

PT Cruiser Forum

Advertisements
amp installation kit

 
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 23 Nov 2010, 06:01 pm
urimashe's Avatar
Cool Cruiser
 
Join Date: Nov 2010
Location: anchorage alaska
Posts: 289
Default amp installation kit

alright i got a kit from wallmart for the power cord and everything for my amp, were should i run it throu the firewall? i got an 2006 PT base Manual, so i dont know if it will fit throu were the clutch mount is or do you think it will still fit?
Reply With Quote
  #2 (permalink)  
Old 23 Nov 2010, 07:14 pm
urimashe's Avatar
Cool Cruiser
 
Join Date: Nov 2010
Location: anchorage alaska
Posts: 289
Default Re: amp installation kit

ive bin looking throu the forum im not finding much on installing it in a Manual PT
Reply With Quote
  #3 (permalink)  
Old 24 Nov 2010, 09:01 pm
Obsessed Cruiser
 
Join Date: Sep 2001
Posts: 27,744
Default Re: amp installation kit

Right above the clutch mount is a rubber grommet that lets the cable to release the hood pass through. That same grommet has enough room for 3 or 4 more cable to pass through it.

The blue wire in the picture is my Clarion AMP wire, plus a couple other smaller wires.



...and yes, I've posted this photo a couple times before when answering questions about firewall pass-thru so you must be using the wrong search words.
__________________
Rules of the forum have been updated as of *07/07/2019* Please read them over.

- All decisions by the Moderator are semi-permanent, can and may be changed at his discretion but definitely will be the final word. Any action performed by the Administrator or Moderators are not to be discussed on the forum.

Last edited by CREWZIN; 24 Nov 2010 at 09:03 pm.
Reply With Quote
  #4 (permalink)  
Old 25 Nov 2010, 03:52 am
urimashe's Avatar
Cool Cruiser
 
Join Date: Nov 2010
Location: anchorage alaska
Posts: 289
Default Re: amp installation kit

yes ive seen that pic before, since mine is a 2006 manual the hole is actualy veary hard to get too, i found it today. i need a metel rod to push throu from the inside to tape the wire too if im going to use that hole, or the hole for the fuse box beside it. thanks for the info on that, just wasent shure if there was space with my clutch.
Reply With Quote
  #5 (permalink)  
Old 27 Nov 2010, 03:05 pm
Young Cruiser
 
Join Date: Nov 2009
Posts: 50
Default Re: amp installation kit

If you can get your hands on a long wire tie ( I use 3' ones). I use them for a snake to push through grommets if possible it generally works 99% of the time.
__________________
2003 PT .. Stock besides tint an audio.
Pioneer 8600
Suprisingly crisp stock mids/highs (for now).
2 - image dyamic ID 8's
1.8 cubes tuned 30hz
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
2nd Horn Installation Merlin1 Tech & Performance Forum 15 19 Feb 2011 08:17 am
How Much for Installation? Mel K Stage Turbo Kits 9 24 Dec 2004 12:24 am
Stage 1 installation PTSleeper Stage Turbo Kits 2 05 Nov 2004 10:15 pm
A Pillar Pod Installation wyzard Interior Accessories Forum 5 05 Apr 2004 10:37 am
Installation of new coil LT Almond GT Turbo Performance 7 09 Mar 2004 03:38 am


All times are GMT -5. The time now is 04:48 am.




Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
LinkBacks Enabled by vBSEO 3.6.0 PL2 © 2011, Crawlability, Inc.
vB.Sponsors