![]() |
|
|
|||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
| Site Home | Forum Home | Photo Gallery | PT Events | PT Videos | Car Videos | Parts Search |
|
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|||
|
[8)]Big Em Enterpries has knobs for manuals, I have purchased two from him. one for my 01 and a custom made one for my 05. Very satisfied with the products from Jim.
__________________
http://memimage.cardomain.net/member_images/10/web/2098000-2098999/2098527_7_full.jpg |
|
|||
|
Quote:
I chose the classic J.C.Whitney 8-ball.
__________________
I just tell anyone who asks that "PT" stands for "Plymouth's Tombstone" www.visualizecommonsense.com |
|
|||
|
I got this from Big Em Enterprises for my dream cruisers - it's an automatic but they had them for manuals. Excellent quality!
![]() |
|
|||
|
Many aftermarket shifter balls come with plastic sleeves now to fit any shaft diameter. If the fit is tight enough, you don't have to use the set screws although it is recommended. PT owners that don't want to change to an aftermarket shifter or be limited in selection with PT specific shifter balls, find that pressing on one of the universal shifter balls of there choice is just as good.
Personally, I installed a Hurst Shifter and had Bruce Roosa of KoolKnobs, custom make a couple of shifter balls for me. Sent him some factory paint (to match the exterior color) and a few pins to be molded in and I had what I wanted. [8)]
__________________
2002 Almond Pearl Limited Edition 27K It\'s nice to be important, but it\'s more important to be nice. http://sci-fi.ptenthusiasts.net/
|
|
|||
|
Quote:
__________________
I just tell anyone who asks that "PT" stands for "Plymouth's Tombstone" www.visualizecommonsense.com |
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Error Codes | thegoldpt | Turbo Performance | 6 | 07 Apr 2007 02:26 pm |
| Error Codes | skylight | Tech & Performance Forum | 6 | 07 Apr 2007 02:19 pm |
| Error Code List | skylight | General Turbo Discussions | 6 | 07 Apr 2007 02:11 pm |
| Auto Tranny will shift even if in 1st gear? | BumperBob | Tech & Performance Forum | 4 | 07 Apr 2005 11:07 am |
| Transmission fliud - B&M Trick Shift or not? | snakepitt1 | Tech & Performance Forum | 8 | 22 May 2004 06:58 pm |