![]() |
|
|
|||||||
| Register | FAQ | Members List | Social Groups | Calendar | Search | Today's Posts | Mark Forums Read |
| Site Home | Forum Home | Photo Gallery | PT Events | PT Videos | Car Videos | Parts Search |
|
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|||
|
Hello everyone, after installing my Indiglow gauges I had to re-install my needles. I was wondering what is the regular idle for your PT Cruisers when it's in park or nutral. I set mine between 0-1,000 RPM's. So it's idleing at 500 you could say. I think it should be pulled off and reset to idle at 1,000 RPM's. Does that sound about right? Keep in mind I have a modified 5 speed with a Supercharger. So anyone with a turbo is welcome to reply also.[:I]
|
|
|||
|
Quote:
|
|
||||
|
When warm, mine sits at 750. Scared myself for a second. Went to the gargae to start the car to see the idle speed and was watching the middle dial (speedometer) instead of the tach. Car started and needle didn't move [:I], then realized I was looking at the wrong dial. [xx(] That's what happens when you drive 3 different cars all the time...you should see when I try and put the side windows down..I'm reaching all over the place until I find the right buttons.
__________________
![]() ...just CREWZIN along! ® . . . PT Cruiser Links Moderator ![]() 2000 PT. Original Owner, 110,000 miles MY technical suggestions are given in GOOD FAITH without total guarantee, if in doubt go to a Garage. Visit My Home Page www.CREWZIN.com |
|
|||
|
Thanks! Sounds like 750 is the norm.
|
|
|||
|
750 when car is warm here also
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| New PT but rough idle?? | Ed | Tech & Performance Forum | 6 | 03 Oct 2009 08:03 am |
| Error Codes | thegoldpt | Turbo Performance | 6 | 07 Apr 2007 02:26 pm |
| Idle with S1 | turbomangt | Stage Turbo Kits | 10 | 10 Mar 2005 05:39 pm |
| Is the 4 Speed A/S realy a six speed? | Ian-PT-GT | General Turbo Discussions | 11 | 16 Apr 2004 10:19 pm |
| Forced Induction w/ Speed Density? | Steve03GT | Turbo Performance | 3 | 18 Jul 2003 06:20 pm |