Is a 14-15 Sec. N/A PT Cruiser Possible

[PTmodrod]

Other than a full exhaust, none (OBX tube Header, ECC high flow cat and borla dual cat back). Its more that Im running a larger series tire on the front now. 225 khumos. gotta love that traction that I never had before... I'll let you know next time I go to the track If you want.

Eventually, (not that you guys are gonna care), I'm going to build a motor for mine. SRT4 bottom end with forged internals (low compression), then a nice turbo setup. Not gonna lie, I don't know exactly what I'm going to do for the turbo yet, but I want it to come on boost around 3000rpm. I'm aiming for 350-400hp. I still have a whole year to decide on that though...

[Mean Green]

Originally Posted by PTmodrod

Other than a full exhaust, none (OBX tube Header, ECC high flow cat and borla dual cat back). Its more that Im running a larger series tire on the front now. 225 khumos. gotta love that traction that I never had before... I'll let you know next time I go to the track If you want.

Eventually, (not that you guys are gonna care), I'm going to build a motor for mine. SRT4 bottom end with forged internals (low compression), then a nice turbo setup. Not gonna lie, I don't know exactly what I'm going to do for the turbo yet, but I want it to come on boost around 3000rpm. I'm aiming for 350-400hp. I still have a whole year to decide on that though...

Good luck! Sounds like you are formulating a plan.

[flynby111]

well i know i would you wouldnt keep up with my Cruiser, but you might just have a chance in poss keeping up with him, my cruiser has 2 chips,the termonator,racing header, performance dual exhaust,,performance cold air intake,performance plugs and wires,performance throttle body spacer,demon coil,HR 11 high voltage system to start with, i ould give your buddy a shot though good luck