Back-up light switch

[dvossbrink]

I have no Back up lights and the dinging noise when you put it in reverse does not chime anymore. I believe I have narrowed it down to what they call a back-up light switch. I checked all of the fuses and they are fine. I do not know the location of the switch to make sure the wires are secure. Please help

[GALVANIZEDYANKEE]

The backup light switch is located on the transmission. It looks simular to the oil pressure sending unit. It unscrews. I have never replaced one on a cruiser, but some of them, when removed, let fluid out of the open hole.

[CREWZIN]

Galvanized Yankee, welcome to the forum. Your electrical expertize is very welcome on this site. I'm not sure of any PT clubs down in Naples, if your interested, but we have a great club in Tampa (Tampa Bay PT Cruiser Club). There's no meetings, we all meet on-line, find out where we're going to get together and just show up. All local and long distance shows are listed too.

Your input in your profile under your occupation is something I've been using for a long time as I retired from one of "those" agencies in the D.C area in 2000 and been living the retired life ever since.

Again, to the forum.


Oh, and one more thing HAPPY BIRTHDAY.

[dvossbrink]

Thanks I thought thats where but have not been able to locate it. Is there any other thing besides that that would cause this.