PT Died going around corner

[stiltz]

Thanks for the help - your not scaring me too badly.

Its cold outside so I'm only spending 5-10 minutes out there at a time. I'll let you know how it goes.

Update: Sensor is out... time to see if anyone has a replacement
Update 2: New sensor is in - car still won't start. Time to verify the integrity of the wiring

-=StIlTz=-

[stiltz]

I just pulled the service records on my car and I had the timing belt replaced at 80,000 miles. I replaced the spark plugs and wires at that time as well. I verified the timing belt was still in place.

I verified the wires from the Camshaft Position Sensor were good with an ohm meter. I also checked every fuse and relay. No dice. Tomorrow it's going to get towed somewhere

I'll let you know what results for future reference.

-=StIlTz=-