PT Cruiser Forum  

Go Back   PT Cruiser Forum > General Forums > Tech & Performance Forum

PT Cruiser Forum

02 pt cruiser ecm

LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 10 Nov 2009, 05:37 pm
Fresh Cruiser
Join Date: Nov 2009
Posts: 7
Default 02 pt cruiser ecm

I have an 02 pt cruiser with a 2.4L engine 5 speed manual non turbo.Cruiser would not start so I ran diagnostic on it and got the ecm failer fault code pulled ecm and it looks as though the gel from inside is leaking out.What I'm wanting to know is I have been told that the manual transmission ecm's in the 02's do not need to be flashed when replaced is this true and if not can the original be fixed?
Reply With Quote
  #2 (permalink)  
Old 10 Nov 2009, 10:53 pm
Fanatic Cruiser
Join Date: Dec 2003
Location: San Antonio, Texas
Posts: 535
Default Re: 02 pt cruiser ecm

02 PT is SBEC controller. Will not need to be reprogrammed but will need to have the VIN, mileage and SKIM secret key transfered. So you will still need to take it to a dealer or an aftermarket shop that can do the above. My advice... take to the dealer an have it repaired there. The replacement PCM is covered by a 12month 12k mile warranty that includes labor.
Reply With Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -5. The time now is 10:43 am.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
LinkBacks Enabled by vBSEO 3.6.0 PL2 © 2011, Crawlability, Inc.