water gauge

[cruiser12]

[:I] Hi folks here's what I need to know ,I just installed a water temp gauge of the elec. kind ,now I removed the orginal one from the thermostat housing and now have the old one just laying there and the light on the dash that means engine trouble lights up cause the old gauge is not connected. So what do I do with the old gauge so I don't have this problem of the light on the dash.
thanks

[Daniel]

can't you hook up the new one to the wires that are there? you should be able to and that would give the dash a connection to turn off the lite... good luck
ptcruizerman
daniel

[cruiser12]

thanks cruise man i think I founf he answer I also disconnected the battery and when you do that the engine lite will come on and you must drive a bit to let the computer reset it self so well see. thanks again[?]