PT Cruiser Forum  
Advertisements
       

Go Back   PT Cruiser Forum > General Forums > Tech & Performance Forum

PT Cruiser Forum

Advertisements
Stock fmic dimensions

 
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 20 Jan 2011, 03:38 pm
SilverSleeper's Avatar
Fresh Cruiser
 
Join Date: Dec 2009
Posts: 35
Default Stock fmic dimensions

Hey does anyone know the dimensions of the stock fmic? On godspeeds website they offer a lot of intercoolers at a good price and I'm trying to find one that's as close to stock size as possible maybe a little bit bigger
Thanks
Chris
__________________
03 GT: Mopar S1,DSP 93 Oct Tune,Composite Manifold,AMX UHP & LHP,Needswings DP with 3" Cutout,AEM Intake Into Modded Stock Air Box,Mopar BOV,Triple Pillar Pod Setup ( Boost Controller,Wideband,Oil Press),Rota Boost 17" Gunmetal Metallic,Nexen N 3000 Tires,Eibach Lowering Spring Kit W/ Tockico Shocks And Struts,HID's,Blacked Out Tail Lights.

( Awaiting Installation: AGP DogBone MM,GodSpeed FMIC )
Reply With Quote
  #2 (permalink)  
Old 21 Jan 2011, 08:02 am
Obsessed Cruiser
 
Join Date: Sep 2001
Posts: 27,744
Default Re: Stock fmic dimensions

Doesn't look like anyone has an answer for you. Since you already have a GT, how about doing some measuring yourself?
__________________
Rules of the forum have been updated as of *07/07/2019* Please read them over.

- All decisions by the Moderator are semi-permanent, can and may be changed at his discretion but definitely will be the final word. Any action performed by the Administrator or Moderators are not to be discussed on the forum.
Reply With Quote
  #3 (permalink)  
Old 21 Jan 2011, 08:05 am
Obsessed Cruiser
 
Join Date: Nov 2007
Location: Mooresville, NC
Posts: 5,324
Default Re: Stock fmic dimensions

Neither the service manual nor the parts catalogs have any dimensions. PTCrew might have this on their site as they have a couple of mod tutorials on replacing the IC, but might be easier to just lift the front end on your car and roll under it and take the measurements. Sorry, can't be of any real help..lol...
Reply With Quote
  #4 (permalink)  
Old 21 Jan 2011, 08:06 am
SilverSleeper's Avatar
Fresh Cruiser
 
Join Date: Dec 2009
Posts: 35
Default Re: Stock fmic dimensions

Well I had planned on it if I could find time away from iv just been very busy and when I do get home it gets to dark and cold
__________________
03 GT: Mopar S1,DSP 93 Oct Tune,Composite Manifold,AMX UHP & LHP,Needswings DP with 3" Cutout,AEM Intake Into Modded Stock Air Box,Mopar BOV,Triple Pillar Pod Setup ( Boost Controller,Wideband,Oil Press),Rota Boost 17" Gunmetal Metallic,Nexen N 3000 Tires,Eibach Lowering Spring Kit W/ Tockico Shocks And Struts,HID's,Blacked Out Tail Lights.

( Awaiting Installation: AGP DogBone MM,GodSpeed FMIC )
Reply With Quote
  #5 (permalink)  
Old 21 Jan 2011, 08:08 am
Obsessed Cruiser
 
Join Date: Nov 2007
Location: Mooresville, NC
Posts: 5,324
Default Re: Stock fmic dimensions

Know what you mean, I've had to put off all my PT work until it gets warmer out, no garage at the new house...lol...
Reply With Quote
  #6 (permalink)  
Old 21 Jan 2011, 08:13 am
SilverSleeper's Avatar
Fresh Cruiser
 
Join Date: Dec 2009
Posts: 35
Default Re: Stock fmic dimensions

*work. Yeah it sucks not having a garage lol
__________________
03 GT: Mopar S1,DSP 93 Oct Tune,Composite Manifold,AMX UHP & LHP,Needswings DP with 3" Cutout,AEM Intake Into Modded Stock Air Box,Mopar BOV,Triple Pillar Pod Setup ( Boost Controller,Wideband,Oil Press),Rota Boost 17" Gunmetal Metallic,Nexen N 3000 Tires,Eibach Lowering Spring Kit W/ Tockico Shocks And Struts,HID's,Blacked Out Tail Lights.

( Awaiting Installation: AGP DogBone MM,GodSpeed FMIC )
Reply With Quote
  #7 (permalink)  
Old 13 Aug 2011, 01:49 pm
Fresh Cruiser
 
Join Date: Aug 2010
Posts: 3
Default Re: Stock fmic dimensions

Not sure if you ever got an answer to the IC size but this is it 18.5 x 6.5 x 2.5.
__________________
/05 GT ATX. K&N CAI. 2'5" Magnaflow with rsntr. Dual pod pillar with AM boost gauge and Innovate LC1 AFR wideband. NGK Iridiums and NGK wires. Boost to 18. Diablo trinity 93 oct tune.Plastic manifold.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
CCA 11" FMIC forcedinduction Turbo Performance 7 04 May 2006 12:50 pm
2.4 turbo dimensions, can you help? sikbrik General Turbo Discussions 6 13 Jun 2005 10:45 am
who would like a larger FMIC? tthrift Vendors & Buyers Forum 10 01 Jun 2004 03:30 am
Front Door Speaker Dimensions? yobiebs Sound and Security Forum 5 23 May 2003 01:07 pm


All times are GMT -5. The time now is 11:48 am.




Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
LinkBacks Enabled by vBSEO 3.6.0 PL2 © 2011, Crawlability, Inc.
vB.Sponsors