Ecm wiring Diagrams??

[Wolfies]

Hi, I've just bought 2003 pt with a blown engine and a 2002 engine complete with all the engine bay wiring.
I am looking for the wiring diagrams for both the 02 and 03 0n ecm connections. Can anyone help??? Thanks Wolfie

[UptownSport]

PM me or someone your e-mail.

The factory manual was stickied above, obvious reasons they had to take it
down I think

[Wolfies]

PM sent

or mail me off my website www.wolfiesworkshop.co.uk thanks.

[Wolfies]

Hi, I have found the following schematic for the 2001

http://i47.tinypic.com/208fbic.jpg

I now just need to know the details for the 03 onwards. I had the car running for a couple of seconds but I am waiting for the SKIM and key from the donor car. I just have a few loose ends to connect.

Can you help???

Thanks Wolfie

[Kawizx9r]

01-02 PCM's had a separate transmission controller didn't they?

My 03 has it built into the PCM, and utilizes 4 ports.

What transmission are you running, auto or manual?

[Wolfies]

Hi. its manual transmission but as you suggest I think the transmission controller is either inside the PCM case or mot relevant on the Manual as there are no extra boxes??:

[KtownCruzer]

Originally Posted by Wolfies

Hi, I have found the following schematic for the 2001

http://i47.tinypic.com/208fbic.jpg

I now just need to know the details for the 03 onwards. I had the car running for a couple of seconds but I am waiting for the SKIM and key from the donor car. I just have a few loose ends to connect.

Can you help???

Thanks Wolfie

Glad for the diagram. I have been looking for that in order to troubleshoot my '01. The '01 has 2 separate plugs though, so do the pin numbers just continue in sequence from c1 to c2? I am used to military wiring diagrams which are detailed right down to every individual connector. And while i am at it, if it turns out the ecm is the root of my problems should i just get one from someone like cardone or go with a non factory type replacement?

[UptownSport]

C1 and C2 numbering isn't sequential, at least on Neon.
There is an e-FSM with militay-like diagrams,

Google: 'FSM PT Cruiser download'

[KtownCruzer]

thanks, i will check that out

[KtownCruzer]

for anyone else who has been looking, here at least is some of the pinouts for 01 pcm 2GN.ORG :: View topic - PCM pin out info (Updated 7-27-11)