door lock question

[KingKole02]

Welcome, hope to see you around.

[SteelBlueGT]

Look on eBay for a very inexpensive way of getting the remotes; how you set them up I dont know!!

[KingKole02]

quote:Originally posted by JaxPT

on that subject, anyone know how i would go about getting a keyless remote. I have keyless entry for sure, after i pulled the dash cover today to do the speakers i seen the remote entry receiver. Problem is the dealer i bought it from took it as a trade in and never got the remote.

so here i sit with keyless entry and no way to use it. think i can pull the numbers off the unit and get a replacement remote?


N/m I just found my answer on ebay no less. universal chrysler remote, says you can program for your vehicle jst check in teh owners manual, damn if it didnt tell me how in the manual. now all i gotta do is get a remote and i'll be good to go

I'd be careful, someone in your area may still have the remote and try to use it to get in YOUR now PT.

[nhrapt]

Welcome to the forum.

[jmack]

Can someone please post the directions on how to do this? My car didn't come with a manual.

[quicksilverdon]

quote:Originally posted by JaxPT

on that subject, anyone know how i would go about getting a keyless remote. I have keyless entry for sure, after i pulled the dash cover today to do the speakers i seen the remote entry receiver. Problem is the dealer i bought it from took it as a trade in and never got the remote.

so here i sit with keyless entry and no way to use it. think i can pull the numbers off the unit and get a replacement remote?


N/m I just found my answer on ebay no less. universal chrysler remote, says you can program for your vehicle jst check in teh owners manual, damn if it didnt tell me how in the manual. now all i gotta do is get a remote and i'll be good to go

Been lotsa posts on this. You have to have 2 remotes already programmed, then you can program a third remote. If you don't have a remote, you have to go to dealer to get it programmed.