head lights

[coach]

is there an easy way to change the high beam head light bulbs. I want to replace the stock lamps with xenon bulbs but I can't get my hand into the opening to turn the bulb holder. Is there a special tool needed or is there a trick to it?

Richard

[2coolPT]

I don't think there is a "tool" for this, ifso I would like to see one. My hands just bearly fit the wheel well access hole, but not without leaving some skin. To make it worse, the bulbs I eventually got to go in were not streight socketed, but had an "elbow" bend. Got them in but not without pain. I was talking to someone at a show reciently and he said that he was able to get to the driver side bulb rather easily by removing the cold air box, which just pulls out. I havn't tried that, but you can check it out. For the passenger side, you will probably need to find someone with smaller hands. Let us know if you find a "tool" to make this job easier.

[blue]

I've installed a set of those Zenon Bulbs and have the scars to prove it. The drivers side was the easiest because I removed the air cleaner box. For the passenger side my hand were in a new shape with scratches and my hands are small.