PT Cruiser Forum  
Advertisements
       

Go Back   PT Cruiser Forum > General Forums > Tech & Performance Forum

PT Cruiser Forum

Advertisements
Cylinder Head on and buttoned up...

 
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 18 Dec 2011, 04:16 pm
wheelgarage's Avatar
Regular Cruiser
 
Join Date: Aug 2009
Location: SF Bay Area
Posts: 171
Default Cylinder Head on and buttoned up...

Had to stop here, due to the water pump issue...here are some pictures of my SLOW progress so far...

I used the Oreilly's oil to soak the lifters, but (not pictured) used Lucas lube for most of the assembly.









__________________

2005 Touring Black - Automagic....California Smog Legal

H&R Cup Kit | TSW Sakata 18x8 35ET | Nankang NS-II 235/40/18 | SPC front alignment cam - rear shim | Master Pro Rotors | Master Pro Ceramic F/R pads | Rebuilt Cylinder Head - Safety Valves and Guides | Felpro Head Gasket and upper rebuild kit | Fail-safe 195 degree thermostat | Mopar Waterpump...lol | 3rd radiator fan motor | Gates timing belt kit | WIX filters (oil, transmission) | Mobile 1 5w30 | Mopar ATF4 | Redline Water Wetter | K&N Drop-In | 4th Drive side Axle | Energy Suspension Torque Mounts | 3rd set of Torque Mounts...
Reply With Quote
  #2 (permalink)  
Old 18 Dec 2011, 04:19 pm
wheelgarage's Avatar
Regular Cruiser
 
Join Date: Aug 2009
Location: SF Bay Area
Posts: 171
Default Re: Cylinder Head on and buttoned up...

The blue seals from Fel-Pro is growing on me...didn't like it at first...but....
__________________

2005 Touring Black - Automagic....California Smog Legal

H&R Cup Kit | TSW Sakata 18x8 35ET | Nankang NS-II 235/40/18 | SPC front alignment cam - rear shim | Master Pro Rotors | Master Pro Ceramic F/R pads | Rebuilt Cylinder Head - Safety Valves and Guides | Felpro Head Gasket and upper rebuild kit | Fail-safe 195 degree thermostat | Mopar Waterpump...lol | 3rd radiator fan motor | Gates timing belt kit | WIX filters (oil, transmission) | Mobile 1 5w30 | Mopar ATF4 | Redline Water Wetter | K&N Drop-In | 4th Drive side Axle | Energy Suspension Torque Mounts | 3rd set of Torque Mounts...
Reply With Quote
  #3 (permalink)  
Old 18 Dec 2011, 05:25 pm
UptownSport's Avatar
Veteran Cruiser
 
Join Date: Jan 2011
Location: 55403
Posts: 3,912
Default Re: Cylinder Head on and buttoned up...

Looks good!
Reply With Quote
  #4 (permalink)  
Old 18 Dec 2011, 10:01 pm
wheelgarage's Avatar
Regular Cruiser
 
Join Date: Aug 2009
Location: SF Bay Area
Posts: 171
Default Re: Cylinder Head on and buttoned up...

I was looking over the gaskets for the exhaust manifold. The gasket to the head looks to fit. The one to the catalytic is too small...? The old one looks good, going to use exhaust paste to seal it.

The O2, looks like good time to replace it, since it has 100k on it, might as well...

Jezzzz...what next...I'm afraid to keep looking at the other parts...
__________________

2005 Touring Black - Automagic....California Smog Legal

H&R Cup Kit | TSW Sakata 18x8 35ET | Nankang NS-II 235/40/18 | SPC front alignment cam - rear shim | Master Pro Rotors | Master Pro Ceramic F/R pads | Rebuilt Cylinder Head - Safety Valves and Guides | Felpro Head Gasket and upper rebuild kit | Fail-safe 195 degree thermostat | Mopar Waterpump...lol | 3rd radiator fan motor | Gates timing belt kit | WIX filters (oil, transmission) | Mobile 1 5w30 | Mopar ATF4 | Redline Water Wetter | K&N Drop-In | 4th Drive side Axle | Energy Suspension Torque Mounts | 3rd set of Torque Mounts...
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Cylinder head interchange Floundering Tech & Performance Forum 5 28 Nov 2011 10:15 pm
Cylinder Head Guide Dowels dgb Tech & Performance Forum 1 20 Jun 2011 10:48 pm
2.4 Cylinder Head '03-'10 UptownSport Classifieds: For Sale/Trade 1 29 Mar 2011 09:04 pm
F/S OEM Cylinder head w/ valves sincitymax Classifieds: For Sale/Trade 0 10 Nov 2010 03:58 pm
Cylinder Head Blow Up Colorado_Aztec Tech & Performance Forum 7 28 Dec 2005 10:45 pm


All times are GMT -5. The time now is 12:18 am.




Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
LinkBacks Enabled by vBSEO 3.6.0 PL2 © 2011, Crawlability, Inc.
vB.Sponsors