PT Cruiser Forum  
Advertisements
       

Go Back   PT Cruiser Forum > General Forums > Tech & Performance Forum

PT Cruiser Forum

Advertisements
rough idol after replacing parts

 
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 29 Nov 2012, 08:14 pm
Fresh Cruiser
 
Join Date: Nov 2012
Location: N.J
Posts: 3
Default rough idol after replacing parts

hello guys maybe someone can point me in the right direction. I just replaced the control arms and motor mounts, upper and lower on my 2005 pt touring now the car has a rough idol in park and when at a stop the rpms drop down to say 600. I put new plugs and wires in a month ago had no problems. It has 70456 miles on it. I put a new pcv new filter in.
Reply With Quote
  #2 (permalink)  
Old 29 Nov 2012, 08:35 pm
Young Cruiser
 
Join Date: Oct 2012
Location: San Diego
Posts: 97
Default Re: rough idol after replacing parts

I've been having the same problem, can't figure it out.
You can view my latest thread about it here Can a "Re-flash" fix any issues?
Reply With Quote
  #3 (permalink)  
Old 29 Nov 2012, 08:47 pm
Busted_PT's Avatar
Obsessed Cruiser
 
Join Date: Jan 2012
Location: Beckley, W.V.
Posts: 13,895
Default Re: rough idol after replacing parts

Quote:
Originally Posted by rot814 View Post
hello guys maybe someone can point me in the right direction. I just replaced the control arms and motor mounts, upper and lower on my 2005 pt touring now the car has a rough idol in park and when at a stop the rpms drop down to say 600. I put new plugs and wires in a month ago had no problems. It has 70456 miles on it. I put a new pcv new filter in.
There is a proper adjustment procedure on the struts. There is a setup procedure in the service manual. this will help with the vibrations.
__________________

03 Dream stock___________________________ 04 Touring turbo lite stock_________ 02 Touring stock_____________________ The "Three Amigos"
__________________________________________________ __________________________________________________ ___________Performance, Body and Service, OEM

This Is my project page.
http://www.ptcruiserlinks.com/forum/...oject-1-a.html

This is a great read from one of our own! Badglas
badglas.blogspot.com
Reply With Quote
  #4 (permalink)  
Old 01 Dec 2012, 09:01 pm
Fresh Cruiser
 
Join Date: Nov 2012
Location: N.J
Posts: 3
Default Re: rough idol after replacing parts

Thank you.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Rough Idle-Replacing the IAC Idle Air Controller engineerrock Tech & Performance Forum 9 07 Jun 2014 07:24 pm
Replacing bumper- any other parts I'll need? (pics) Vaskania Exterior Accessories Forum 17 21 Nov 2010 06:06 pm
Rough Idle, Rough @60, check engine light NEW Dystroy Tech & Performance Forum 8 12 Jan 2009 09:07 pm
IDOL HELP, & MX-5 1lowufo Tech & Performance Forum 5 21 Aug 2004 04:47 pm


All times are GMT -5. The time now is 11:58 am.




Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
LinkBacks Enabled by vBSEO 3.6.0 PL2 © 2011, Crawlability, Inc.
vB.Sponsors