PT Cruiser Forum  
Advertisements
       

Go Back   PT Cruiser Forum > General Forums > Tech & Performance Forum

PT Cruiser Forum

Advertisements
A Punch By Any Other Name... Center, Drift, Starter... or Not...

 
Like Tree3Likes
  • 1 Post By scoleman69
  • 2 Post By CREWZIN

Closed Thread
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 16 Dec 2013, 12:57 pm
Young Cruiser
 
Join Date: Feb 2009
Posts: 63
Default A Punch By Any Other Name... Center, Drift, Starter... or Not...

Quote:
Originally Posted by NitroPT View Post
Well I guess we will just say that there are more then one name to call things and call it even aeh "Sparky"? :p

PPC208A, Punch, Starter, 1/4" point, 6 3/4"

Wait a minute... not so fast there Sparky...

The above referenced 'Punch, Starter' has a 'modified parabolic curve' not FLAT per your original call out at #4 in LUG NUT Q

'If ya liked the OCTJMO... ICBW... Betcha really gonna like FUITCTAJ...'

';)

PS: Education and fun all at the same time... now that's a win win deal I hope our Astute Moderators agree with... ';)
__________________
IMSA RS 69
'ol corps rac'r
Rac'n Class of '69
Car #69
  #2 (permalink)  
Old 16 Dec 2013, 01:28 pm
Young Cruiser
 
Join Date: Feb 2009
Posts: 63
Default Re: A Punch By Any Other Name... Center, Drift, Starter... or Not...

BTW while on the subject of terminology I wanted to say about your following comments in a [ yet another ] recently closed thread...

Quote:
Originally Posted by NitroPT View Post
This may be of interest to you for use on auto forums?

http://www.ptcruiserlinks.com/forum/...reviation.html
A very good article my friend, and in general I agree with your premise and conclusions.

While I do find a lot of ACROS annoying, especially their overuse, I also find it educational in some respects, kinda like having to look up words one doesn't comprehend.
__________________
IMSA RS 69
'ol corps rac'r
Rac'n Class of '69
Car #69
  #3 (permalink)  
Old 16 Dec 2013, 01:33 pm
NitroPT's Avatar
Obsessed Cruiser
 
Join Date: Jun 2012
Location: USA kalyfornia
Posts: 15,763
Default Re: A Punch By Any Other Name... Center, Drift, Starter... or Not...

OMG you really started a thread about this??



ok here ya go because you opened the Pandora's box with information on a recently closed thread with a specif agenda appearing to have the last word?


The radiator thread you start was closed before I could post this.

Take the information anyway you want?
Buy ToughOne or Ready-Rad Radiator 431461 at Advance Auto Parts

Your information posted

You highlighted the Tough one?

Tough one is APDI and their part for a # 8012298 to some distributors like advance auto is #431461
Automotive Aftermarket Catalog - MyCarParts



Ready Radiator is actually Vista Pro Ready Radiator.
Vista-Pro Online Parts Catalog



So it appears that your chosen retailer has the wrong description for the parts they sold you and received received. By looking up the aftermarket radiator companies specification and what they offer as a replacement for the PT Cruiser application. IMHO Reviewing their specification should have been done before that thread was titled and the first post information ?

Also Vista Pro Ready Radiator is not longer selling radiators to advance auto either.




Where are the CHRYSLER generated OEM Radiator specifications? I am not saying they do not exists or available I personally have not found them. And I did to be clear said OEM generated not some internet sourced other then CHRYSLER Corp.



Round 2.....
__________________
To view larger pictures simply "click " on the picture!

Dalai Lama
"Share you knowledge. It's the best way to achieve immortality."
ASE MASTER TECHNICIAN

Last edited by NitroPT; 16 Dec 2013 at 01:36 pm.
  #4 (permalink)  
Old 16 Dec 2013, 01:49 pm
NitroPT's Avatar
Obsessed Cruiser
 
Join Date: Jun 2012
Location: USA kalyfornia
Posts: 15,763
Default Re: A Punch By Any Other Name... Center, Drift, Starter... or Not...

Quote:
Originally Posted by scoleman69 View Post
Wait a minute... not so fast there Sparky...

The above referenced 'Punch, Starter' has a 'modified parabolic curve' not FLAT per your original call out at #4 in LUG NUT Q

'If ya liked the OCTJMO... ICBW... Betcha really gonna like FUITCTAJ...'

'

PS: Education and fun all at the same time... now that's a win win deal I hope our Astute Moderators agree with... '
I have used that **tool set for years...




I use the term *Parabolic as an audiophile not auto technician and realy never with my **tools. Now what is funny here is the description from snap-on and that you took the time to note it probably had to look up all the meanings of Parabolic (*I did only ever used it as I previously mentioned) remember or go re-read where and how I used the tools term in a thread and then start a thread to point it put. What does that make you and some think I am over the edge with responses sometimes on forums?
__________________
To view larger pictures simply "click " on the picture!

Dalai Lama
"Share you knowledge. It's the best way to achieve immortality."
ASE MASTER TECHNICIAN
  #5 (permalink)  
Old 16 Dec 2013, 02:00 pm
Young Cruiser
 
Join Date: Feb 2009
Posts: 63
Default Re: A Punch By Any Other Name... Center, Drift, Starter... or Not...

Quote:
Originally Posted by NitroPT View Post
Round 2.....:)
Ya gotta be kidding me Nitro... Really...

Are you off yer meds again... ';)
red06limited likes this.
__________________
IMSA RS 69
'ol corps rac'r
Rac'n Class of '69
Car #69
  #6 (permalink)  
Old 16 Dec 2013, 02:15 pm
NitroPT's Avatar
Obsessed Cruiser
 
Join Date: Jun 2012
Location: USA kalyfornia
Posts: 15,763
Default Re: A Punch By Any Other Name... Center, Drift, Starter... or Not...

Quote:
Originally Posted by scoleman69 View Post
Ya gotta be kidding me Nitro... Really...

Are you off yer meds again... '
You do not know me to mention meds and only member on them in this forum is Busa.

Lighten up I already miss yer accent in your responses.


Might I suggest you take some time and go finish your member info. It appears you have the making to be hanging out with all of us for a while. It would be nice to go to your members info and get a brief about you saving you the trouble of having to post a long story about a single event in your life and correlating it around a thread? But then don't be surprised if you need to toss in the credential card once in a while around here.
IMO the only ones that do not finish or supply member's info are those that do kamikaze posting. They will drop a response and fly away popping on another day. I personally will always go look to see about a member when I get involved interacting responses on a forum. I look for what they posted in the past and also if they have available what they filled in as a member.
__________________
To view larger pictures simply "click " on the picture!

Dalai Lama
"Share you knowledge. It's the best way to achieve immortality."
ASE MASTER TECHNICIAN
  #7 (permalink)  
Old 16 Dec 2013, 02:18 pm
Obsessed Cruiser
 
Join Date: Sep 2001
Posts: 27,744
Default Re: A Punch By Any Other Name... Center, Drift, Starter... or Not...

I knew this wasn't going to end well and I thought by closing the other thread I headed off the name calling and insults.

This thread is ending right here!
__________________
Rules of the forum have been updated as of *07/07/2019* Please read them over.

- All decisions by the Moderator are semi-permanent, can and may be changed at his discretion but definitely will be the final word. Any action performed by the Administrator or Moderators are not to be discussed on the forum.
Closed Thread


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
PT Punch Bug!!! Teknoron67 General PT Cruiser Discussions 5 18 Aug 2011 10:16 pm
PT Cruiser Snow Drift skylight PT Cruiser Videos 0 13 Dec 2007 08:03 pm
punch Punch Testing 11 04 Nov 2003 11:37 am
Hey punch nbr10 Canada PT Forum 3 22 Sep 2003 03:41 pm


All times are GMT -5. The time now is 03:00 am.




Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
LinkBacks Enabled by vBSEO 3.6.0 PL2 © 2011, Crawlability, Inc.
vB.Sponsors