Air intake help

[BORICUA]

I just installed a Bomz racing intake on my base model and i love the sound and the increase performance i got, however i got couple of questions. 1-What i'm i supposed to do with the little air hose that goes under the original filter on the side of the air box? I just left it in the same place, don't know what to do?? And on the pipe the replace the rubber one there's 2 holes I used one for the temp switch and the other one i had to plug, since i didn't know what is it for, anyone knows?

[BORICUA]

can anyone out there help me out? please!

[Taz_FL]

Boricua, sorry I can't help you since I haven't performed this mod...but... you can try looking at this site http://www.ptdoityourself.net/ptguide.html its a site that tells you step by step (with photos) on how to do the various mods....maybe it will have something to help you out

[CREWZIN]

Boricua,

When I replaced my stock air box with a Volant cold air system, I took the plastic tube that went under the original air box and turned it around to fit into the other hole that you plugged.

[KR4MC Steve]

On the K&N FIPK Gen II Intake System, the hose plugs on to a "nipple" on the K&N intake Tube. On this Pic it is covered with heat shrink tubing where it attaches to retain the braid covering I put on.



2002 Inferno Red 5-Speed Touring Edition
www.imagestation.com/album/?id=4291109263

[bobs turbo pt]

hey BORICUA was the performance that good?? have a friend who wants to do the same thing you did

[BORICUA]

Hey Bob there was improvement in the performance, how much? can't really tell but i can really feel it, and the sound is just great.

[bobs turbo pt]

well they say if you can feel it ,it was worth it