booger bushings

[CHROMEDCRUISER]

Just received a set of booger bushings. I've found where two of the smaller bushings go, but what about the larger one, and the third smaller bushing? Does anyone have a good set of instructions (preferably with pictures) on how to install them?

[CJJ]

search for Beacon's post of 7/11/04. there are pictures of the install there. Search for Mopar short-throw shifter installed and picture. It's on the second page. CJJ

[PTurbed]

quote:Originally posted by CHROMEDCRUISER

booger bushings.

[8)] Two small go on the shifter end, one small & the large go on the tranny end. [8D]

If you're putting in the Hurst you'll need to modify one of the small bushings by drilling out the internal rib (for lack of a better word) so that it'll go over the shoulder bolt in the Hurst kit. It does become some what obvious.

Then enjoy them lil boogers!!! [^]

[CHROMEDCRUISER]

Thanks for your help guys. It was a real pain in the A$# to get them to go on all the way. It took me a while to get them installed. But now that I've got them on, I think this was probably one of the best mods I've done so far, especially the cost-vs-benefit.

[Hooligan]

quote:Originally posted by CHROMEDCRUISER

Thanks for your help guys. It was a real pain in the A$# to get them to go on all the way. It took me a while to get them installed. But now that I've got them on, I think this was probably one of the best mods I've done so far, especially the cost-vs-benefit.

..and just think how much you learned. I enjoy doing all of my own "MODS". It makes me feel even MORE proud of my PT!!

[PTurbed]

quote:Originally posted by Hooligan

..and just think how much you learned. I enjoy doing all of my own "MODS". It makes me feel even MORE proud of my PT!!

[:X] What he said!!! [8)]

[taikuchin]

Hurst Boogers...a cold day install (& a great fix for that evil 2-3 shift!).