here it is,hope it works

[barberpole16]

[CREWZIN]

That's one way to do it, but there's an easier way. Back on Photobucket, your see some lines under your picture. Copy the line that starts with "http". Come back here and on the REPLY page hit the little box that says "PIC". That will put the picture brackets into your post. Now paste the line that you copied from Photobucket between the brackets that are in your post. When you hit "Post New Reply", the picture will show up in your post.

[barberpole16]

[img][/img]http://i47.photobucket.com/albums/f182/barberpole16/pt.jpg
well this was easy[|)] thanks,

[barberpole16]

[img][/img]http://i47.photobucket.com/albums/f182/barberpole16/pt.jpg

[Wally]

Go back to Photobucket....look at the picture you want to use...look at the three choices of links...the last link (3rd one down) is the one to use for posting images and it already has the [ img] ...[ /img] brackets....now put your pointer on that line a do ONE click to highlight it...then do a keyboard CTRL C to copy the link. Now come here to your post and place the link into your words by starting a new line and doing a keyboard CTRL V to paste the link.



You can RIGHT click on the picture above and select PROPERTIES to see where the picture originates from (the link)...and if you want you could use that link again by click selection and a CTRL C copy and a CTRL V paste and then add the [ img] LINK [ /img] brackets. This is a good way to do pictures that you have found that you want to include, as in this example for the Header here at PTCruiserLinks.com.....Cut and paste...


Learn to cut and paste, make life simple.

[bobs turbo pt]

nice pics !! thanks for sharing them !![^]

[Jimbo]

Nice pics. Is that a chrome grille or silver?