| Custom Wheels |
|
|
|
|||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
| Site Home | Forum Home | Photo Gallery | PT Events | PT Videos | Car Videos | Parts Search |
|
 |
|
|
LinkBack | Thread Tools | Display Modes |
13 May 2003, 10:20 am
|
|||
|
|||
..SRT-4 vs GT pcm...
...if the PCM is programmed differently for the SRT-4 and they are able to hold the boost through out the rpm range maybe we ought to try switching the PCM's and seeing if we can get the high horsepower readings to the wheels on a PT.
    
|
|
13 May 2003, 01:30 pm
|
|||
|
|||
|
I have been reading their forum also and they are having the same problems.
__________________
Don 2003 PT GT
|
|
15 May 2003, 03:00 am
|
|||
|
|||
|
we have not been holding boost up to redline. If we set it to 15psi, it drops to 13psi after 4k RPM. Read my E.D. Mod if you want to hold boost on my site.
Also try putting a check valve on your stock surge valve so it wont cycle. This causes boost to fluctuate when you raise the boost. Its a good idea to have an aftermarket BOV also when disabling the stock surge valve. The PCM i beleive hooks up different than you guys. We have 3 plugs on out pcm and they are coller coded in black, white and red on the ecu connector ends.
__________________
 E.D. 3\" Turbo Back, , HKS SSBOV, GReddy-e01 Boost controller, Greddy E-manage fuel management, Blitz Turbo Timer, JE pistons, Ported Head, E.D. Large Frontmount Intercooler, E.D. Tubular manifold with t3/t4 (prototype), IPP coilovers, Limited Slip.
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
