PT Cruiser Forum  
Advertisements
       

Go Back   PT Cruiser Forum > 2.4L Turbo Forums > Turbo Performance

PT Cruiser Forum

Advertisements
Dyno run today. what a blast.

 
Like Tree3Likes
  • 3 Post By 03GTCruiser

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 21 Apr 2012, 01:31 pm
03GTCruiser's Avatar
Veteran Cruiser
 
Join Date: Nov 2008
Location: ft. Lauderdale, FL
Posts: 4,863
Default Dyno run today. what a blast.

This is with my 2003 PT cruiser gt

Mopar stage 1
Diablosport predator with 93Oct canned tune
Amx hard pipes with HKS bov
BWoody solid motor mounts
3" o2 housing
3" downpipe with electric cutout

Pull 1 with downpipe closed
Pull 2 and 3 downpipe open


__________________
Sold 2003 Pt Cruiser GT Autostick. Sold
Now a slow 2009 Pontiac vibe 2.4l 5-speed.
http://www.ptcruiserlinks.com/forum/image.php?type=sigpic&userid=9656&dateline=1247691  818

227 HP and 281 TQ

new best of 14.56 1/4 mile on 7/25/12 still using the canned tune from my diablosport predator.

*Stage 1, DSP w/93 canned tune, 3" o2 housing, 3" FWDPerformance downpipe with cutout. Bwoody solid mounts. AMX1397 TTAB with K&n drop in filter and airbox mod. AMX1397 lower pipe and AMX1397 uppipe with HKS BOV
* stock nsrt rims powdercoated black, chrome pillars.
* 3 gauge pod w/ aem wideband, Autometer ultralite oil pressure and 30/30 boost, Mopar 8" sub.*

Reply With Quote
  #2 (permalink)  
Old 21 Apr 2012, 02:18 pm
Kawizx9r's Avatar
Senior Cruiser
 
Join Date: Aug 2010
Location: Salinas, CA
Posts: 1,575
Default Re: Dyno run today. what a blast.

You seem to be running a tad bit lean, aside from that good numbers!

Wait until you install a ported exhaust manifold with the elbow-mod and even more; an E1/E2 equivalent turbo.

PS Just noticed in your sig you haven't done the upper/lower intake mani swap, DO EEEEET!
__________________
Quote:
Originally Posted by Chromenut View Post
Kawi is a friggin genius!
Reply With Quote
  #3 (permalink)  
Old 21 Apr 2012, 02:30 pm
03GTCruiser's Avatar
Veteran Cruiser
 
Join Date: Nov 2008
Location: ft. Lauderdale, FL
Posts: 4,863
Default Re: Dyno run today. what a blast.

Yup. Running lean, going to work on that at some point soon. I usually don't run it with the diablosport so I don't have to worry right now.
__________________
Sold 2003 Pt Cruiser GT Autostick. Sold
Now a slow 2009 Pontiac vibe 2.4l 5-speed.
http://www.ptcruiserlinks.com/forum/image.php?type=sigpic&userid=9656&dateline=1247691  818

227 HP and 281 TQ

new best of 14.56 1/4 mile on 7/25/12 still using the canned tune from my diablosport predator.

*Stage 1, DSP w/93 canned tune, 3" o2 housing, 3" FWDPerformance downpipe with cutout. Bwoody solid mounts. AMX1397 TTAB with K&n drop in filter and airbox mod. AMX1397 lower pipe and AMX1397 uppipe with HKS BOV
* stock nsrt rims powdercoated black, chrome pillars.
* 3 gauge pod w/ aem wideband, Autometer ultralite oil pressure and 30/30 boost, Mopar 8" sub.*

Reply With Quote
  #4 (permalink)  
Old 21 Apr 2012, 03:31 pm
Obsessed Cruiser
 
Join Date: Nov 2007
Location: Mooresville, NC
Posts: 5,324
Default Re: Dyno run today. what a blast.

Did Nemo do any tuning, or just a straight dyno run? Also looks like he may be running some slightly different software than when we tuned my PT at RageTek.





At the time of this run, all I had was the modded airbox, K&N drop-in filter, and 93 tune. AMX (from PTCrew) took me over and introduced me to Nemo, then he went back to make me a set of custom SS upper and lower pipes. Wish I'd tried it with those but kept blowing out my clutch. After Nemo and I got done I took my PT over to PBIR and ran the quarter mile, blew the clutch out again, and had to limp all the way back to North Carolina. I may go back down there with my Nemo tune and run again, since now I've got a Stage 2 setup and new clutch. Nemo might be interested in seeing his own numbers increase. It is a total blast!

Last edited by Chromenut; 21 Apr 2012 at 03:38 pm.
Reply With Quote
  #5 (permalink)  
Old 21 Apr 2012, 04:54 pm
03GTCruiser's Avatar
Veteran Cruiser
 
Join Date: Nov 2008
Location: ft. Lauderdale, FL
Posts: 4,863
Default Re: Dyno run today. what a blast.

Quote:
Originally Posted by Kawizx9r View Post

PS Just noticed in your sig you haven't done the upper/lower intake mani swap, DO EEEEET!
Would love to. Just haven't found that special deal yet while I have money.
__________________
Sold 2003 Pt Cruiser GT Autostick. Sold
Now a slow 2009 Pontiac vibe 2.4l 5-speed.
http://www.ptcruiserlinks.com/forum/image.php?type=sigpic&userid=9656&dateline=1247691  818

227 HP and 281 TQ

new best of 14.56 1/4 mile on 7/25/12 still using the canned tune from my diablosport predator.

*Stage 1, DSP w/93 canned tune, 3" o2 housing, 3" FWDPerformance downpipe with cutout. Bwoody solid mounts. AMX1397 TTAB with K&n drop in filter and airbox mod. AMX1397 lower pipe and AMX1397 uppipe with HKS BOV
* stock nsrt rims powdercoated black, chrome pillars.
* 3 gauge pod w/ aem wideband, Autometer ultralite oil pressure and 30/30 boost, Mopar 8" sub.*

Reply With Quote
  #6 (permalink)  
Old 22 Apr 2012, 12:40 am
Kawizx9r's Avatar
Senior Cruiser
 
Join Date: Aug 2010
Location: Salinas, CA
Posts: 1,575
Default Re: Dyno run today. what a blast.

Quote:
Originally Posted by 03GTCruiser View Post
Would love to. Just haven't found that special deal yet while I have money.
It's about 98 bucks total for upper+lower+12 bolts (5 for the upper manifold, 5 for the lower manifold, and 2 for the rear of the upper manifold to bracket).

Gasket rings are pre-installed in the upper intake manifold.
__________________
Quote:
Originally Posted by Chromenut View Post
Kawi is a friggin genius!
Reply With Quote
  #7 (permalink)  
Old 22 Apr 2012, 12:01 pm
UptownSport's Avatar
Veteran Cruiser
 
Join Date: Jan 2011
Location: 55403
Posts: 3,912
Default Re: Dyno run today. what a blast.

That's alot!
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
WHAT A BLAST!! TOTD ON SATURDAY! Chromenut PT Cruiser Convertible Forum 14 24 Sep 2009 08:32 pm
Artic Blast Kills 2005 PT Cruiser RozesofSharon General PT Cruiser Discussions 18 20 Jan 2009 08:39 pm
Finally got on the Dyno...@@Dyno Scans@@ TripleJackInGA Turbo Performance 30 01 Jul 2004 12:14 pm
Going to the dyno today PVO PT Stage Turbo Kits 15 22 Aug 2003 10:44 am


All times are GMT -5. The time now is 06:33 pm.




Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
LinkBacks Enabled by vBSEO 3.6.0 PL2 © 2011, Crawlability, Inc.
vB.Sponsors